779478
10
Zoom out
Zoom in
Vorherige Seite
1/114
Nächste Seite
GBIE 7
PBSD 900 A1
Fitting the dust collector
Push the dust collector onto the dust collector
connection from above.
Dismantling/removing the dust collector
Pull the dust collector off upwards.
Connecting a dust extraction adapter and
reducer for an external extraction appliance
Push the dust extraction adapter onto the
connection .
Push the reducer for the dust extraction
adapter into the adapter fitting .
Push the hose from a suitable dust extraction
appliance (e.g. a workshop vacuum cleaner)
onto the reducer for external vacuum
extraction.
Removing the dust extraction adapter and
reducer for an external extraction appliance
Pull off the hose of the dust extraction
appliance.
Remove the reducer for external dust
extraction.
Pull the dust extraction adapter upwards
offthe connection .
Working procedures
A light grinding pressure is sufficient
Apply minimal pressure when grinding. The belt
grinder's own weight is sufficient for a good
grinding result. In addition, working this way
helps to reduce the wear on the abrasive belt
and the surface of the workpiece will become
more smooth.
Removal and surface
The material removal rate and surface quality
are determined by the belt speed and grain
strength of the abrasive belt (see also the
section "Selecting speed and abrasive belt").
Grinding
Place the appliance on the workpiece when
switched on and work at a moderate feed rate.
Guide the grinder in parallel and overlapping
sanding motions over the workpiece. To avoid
unpleasant transverse grinding marks, always
sand in the direction of the grain.
After completing the task, lift the appliance from
the workpiece and then switch it off.
NOTE
Always hold the appliance firmly with two
hands while working.
Use
Switching on and off
While operating the belt grinder, you can choose
between instantaneous and continuous operation.
Switching to instantaneous operation
Press the ON/OFF switch .
Switching off instantaneous operation
Release the ON/OFF switch .
Switching to continuous operation
Press the ON/OFF switch , keep it pressed
in and then press the lock button .
Switching off continuous operation
Press the ON/OFF switch and then
release it.
Emptying the dust collector
The dust collector should be emptied after every
10 minutes of operation at least.
Pull the dust collector off (see section
"Attaching/removing a dust extraction unit")
Shake the dust collector over a rubbish
binto empty it.
Fit the dust collector back onto the
appliance.
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside PBSD 900 A1 - IAN 373104 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info