Bedienungsanleitung Parkside PBSPA 12 B2 - IAN 379888 (Seite 21 von 240) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch)

796079

Zoom out

Zoom in

Vorherige Seite

1/240

Nächste Seite

GB IE

d) Remove any adjusting key or

wrench before turning the pow-

er tool on. A wrench or a key left at-

tached to a rotating part of the power

tool may result in personal injury.

e) Do not overreach. Keep proper

footing and balance at all times.

This enables better control of the power

tool in unexpected situations.

f) Dress properly. Do not wear

loose clothing or jewellery. Keep

your hair, clothing and gloves

away from moving parts. Loose

clothes, jewellery or long hair can be

caught in moving parts.

g) If dust extraction and collection

devices can be installed, make

sure that these are connected

and used correctly. Use of dust

collection can reduce dust-related haz-

ards.

h) Do not allow yourself to be

lulled into a false sense of se-

curity and do not disregard the

safety rules for power tools,

even if you are familiar with the

power tool after using it many

times. Careless action can lead to

serious injuries within a fraction of a

second.

4) POWER TOOL USE AND CARE

a) Do not force the power tool. Use

the correct power tool for your

application. The correct power tool

will do the job better and safer at the

rate for which it was designed.

b) Do not use the power tool if the

switch does not turn it on and

off. Any power tool that cannot be

controlled with the switch is dangerous

and must be repaired.

c) Remove the plug from the wall

socket and/or remove the re-

chargeable battery before you

change the device’s settings,

change accessory parts or put

away the power tool. Such pre-

ventive safety measures reduce the risk

of starting the power tool accidentaIly.

d) Store idle power tools out of the

reach of children and do not al-

low persons unfamiliar with the

power tool or these instructions

to operate the power tool. Power

tools are dangerous in the hands of

untrained users.

e) Look after the power tool and

application tool carefully. Check

for misalignment or binding

of moving parts, breakage of

parts and any other condition

that may affect the power tool’s

operation. If damaged, have the

power tool repaired before use.

Many accidents are caused by poorly

maintained power tools.

f) Keep cutting tools sharp and

clean. Properly maintained cutting

tools with sharp cutting edges are less

Iikely to bind and are easier to control.

g) Use the power tool, accessories

and tool bits etc. in accordance

with these instructions, taking

into account the working condi-

tions and the work to be per-

formed. Use of the power tool for op-

erations different from those intended

could result in a hazardous situation.

h) Keep handles and grip surfaces

dry, clean and free from oil and

grease. Slippery handles and grip

surfaces do not permit safe operation

and control over the power tool in un-

expected situations.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PBSPA 12 B2 - IAN 379888 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info