Bedienungsanleitung Parkside PDBS 6.2 A1 - IAN 43096 (Seite 34 von 39) (Deutsch, Englisch, Holländisch)

595286

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

34 GB

General safety rules

Accessory hazards

Disconnect the nibbler or shear from the energy

supply before ﬁtting or changing the inserted

tool or accessory.

Use only sizes and types of accessories and

consumables that are recommended by the man-

ufacturer of nibblers or shears; do not use other

types or sizes of accessories or consumables.

Cutters can become hot during use; do not touch.

Do not use cracked or deformed accessories or

inserted tools.

Workplace hazards

Slips, trips and falls are major causes of work-

place injury. Be aware of slippery surfaces

caused

by use of the tool and also of trip hazards ca

used

by the air line or hydraulic hose.

Proceed with care in unfamiliar surroundings.

There can be hidden hazards, such as electric-

ity or other utility lines.

The nibbler or shear is not intended for use in

potentially explosive atmospheres and is not

insulated against contact with electric power.

Ensure that there are no electrical cables, gas

pipes, etc., which can cause a hazard if dam-

aged by use of the tool.

Dust and fume hazards

Dust and fumes generated when using nibblers

and shears can cause ill health (for example

cancer, birth defects, asthma and / or dermatitis);

risk assessment and implementation of appro-

priate controls for these hazards are essential.

Risk assessment should include dust created by

the use of the tool and the potential for disturb-

ing existing dust.

Operate and maintain the nibbler or shear as

recommended in these instructions, to minimize

dust or fume emissions.

Direct the exhaust so as to minimize disturbance

of dust in a dust-ﬁlled environment.

Where dust or fumes are created, the priority

shall be to control them at the point of emission.

All integral features or accessories for the col-

ection, extraction or suppression of airborne d

ust

and fumes should be correctly used and main-

tained in accordance with the manufacturer’s

instructions.

Select, maintain and replace the consumable /

inserted tool as recommended in the instruction

handbook to prevent an unnecessary increase

in dust or fumes.

Use respiratory protection in accordance with

the employer’s instructions and as required by

occupational health and safety regulations.

Noise hazards

Exposure to high noise levels can cause perma-

nent, disabling hearing loss and other problems,

such as tinnitus (ringing, buzzing, whistling or

humming in the ears). Therefore, risk assessment

and implementation of appropriate controls for

these hazards are essential.

Appropriate controls to reduce the risk may

include actions such as damping materials to

prevent workpieces from “ringing”.

Use hearing protection in accordance with

employer’s instructions and as required by

occupational health and safety regulations.

Operate and maintain the nibbler or shear as

recommended in the instruction handbook, to pre-

vent an unnecessary increase in the noise level.

Select, maintain and replace the consumable /

inserted tool as recommended in the instruction

handbook, to prevent an unnecessary increase

in noise.

If the nibbler or shear has a silencer, always

ensure it is in place and in good working order

when the nibbler or shear is being operated.

Vibration hazards

Exposure to vibration can cause disabling dam-

age to the nerves and blood supply of the hands

and arms.

Wear warm clothing when working in cold con-

ditions and keep your hands warm and dry.

General safety rules / Before use / Start-up

43096_par_Druckluft-Blechschere PDBS 6.2A1_content_DE_NL.indd 34 28.05.14 16:57

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PDBS 6.2 A1 - IAN 43096 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info