Bedienungsanleitung Parkside PDEXS 150 B2 - IAN 110141 (Seite 6 von 76) (Deutsch, Englisch, Holländisch, Französisch, Schwedisch, Finnisch)

595309

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

PDEXS 150 B2

WARNING!

► The noise emission levels speciﬁed in these in-

structions have been measured in accordance

with the standardised measuring procedure

speciﬁed in ISO 15744 and can be used to

make equipment comparisons. The noise emis-

sion values vary in accordance with the use

of the compressed air tool and may be higher

than the values speciﬁed in these instructions

in some cases. It is easy to underestimate the

noise emission load if the compressed air tool

is used regularly in a certain manner.

NOTE

► For an accurate estimate of the noise emission

load during a certain working period, the

times during which the appliance is switched

oﬀ or is running but not actually being used

must also be taken into consideration. This

can signiﬁcantly reduce the noise emission

load over the total working period.

General safety instruc-

tions for compressed

air tools

WARNING!

► For multiple hazards: Please ensure that you

have read and understood the safety instruc-

tions before adjusting, operating, repairing,

maintaining or replacement of accessories

on the sander or polisher as well as before

working in the vicinity of the machine. Failure

to do this can result in serious bodily injury.

■ The sander or polisher should only be adjusted, set or

used by adequately qualiﬁed and trained operators.

■ This sander or polisher may not be modiﬁed. Mod-

iﬁcations can reduce the eﬀectiveness of the safety

measures and increase the risks for the operator.

■ Do not use a sander or polisher if the tool has

been damaged.

■ The appliance must be inspected regularly to

ensure that it is labelled with the required rated

values and markings given in this manual. The

user must contact the manufacturer to obtain

replacement labels if necessary.

Save all warnings and safety instructions

for future reference.

The safety instructions should not be lost –

give them to the operator.

Hazards caused by ﬂying parts

■ If a workpiece or accessory or even part of the

machine tool itself breaks, parts can be ﬂung

out at high speeds.

■ When operating the sander or polisher or when

exchanging accessories on the appliance,

always wear eye protection. The degree of nec-

essary protection must be evaluated separately

for each individual task.

■ Wear a safety helmet if working above head

height. In this case, the risks for others should

also be assessed.

■ You must ensure that the workpiece has been

securely ﬁxed.

■ Ensure that the sparks generated during use

cannot cause any hazards.

■ Disconnect the grinder from the power supply

before replacing the grinding material and

before carrying out maintenance work.

■ In this case, the risks for others should also be

assessed.

Hazards caused by entanglement

■ Suﬀocation, scalping or and/or cut wounds

can occur if loose clothing, jewellery, necklaces,

hair or gloves are not kept away from the

machine and its accessories.

Hazards during operation

■ When using the machine, the operator's hands can

be subject to hazards such as cuts, grazing and

heat. Wear suitable gloves to protect your hands.

■ The operator and maintenance personnel must

be physically capable of handling the size, mass

and power of the machine.

■ Hold the machine correctly: be ready to counter-

act any normal or sudden movements - have

both hands ready.

■ Ensure that your body is balanced and that you

have a secure standing position.

■ Release the start/stop control in case of a disrup-

tion to the electricity supply.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PDEXS 150 B2 - IAN 110141 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info