Bedienungsanleitung Parkside PDFP 500 B2 - IAN 96898 (Seite 26 von 28) (Deutsch, Englisch, Holländisch)

595410

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

26 GB

Disposal / Translation of the original declaration of conformity / ManufacturerMaintenance and Cleaning / Service / Warranty

some materials of the paint spray gun. This can

lead to dangerous reactions.

ATTENTION! Never immerse the paint spray

gun completely in solvent.

After each use, spray thinner (only in the

open

air – danger of explosion!) or water

through the device.

To clean the casing, nozzle head

and the

spray holes inside it, use a cloth or the cleaning

brush provided. Never use petrol, solvents or

cleaning agents that attack plastic.

First unscrew the stroke stop screw

by turning

it anti-clockwise

Remove the spring

Remove the needle

with the aid of pliers

(see Fig. A).

Clean the needle

carefully with the brush

also refer to Fig. B.

Replace the needle

in the paint spray gun.

Position the spring

on the end of the needle

Tighten the stroke stop screw

by turning it

clockwise

Unscrew the ﬂow cup

from the gun by tur-

ning anticlockwise

Remove the ﬁlter

, as shown in Figure C, and

clean it with the cleaning brush.

Clean the interior screw thread

of the ﬂow

cup

with the cleaning brush (see Fig. D).

Replace the ﬁlter in the gun (see Fig. C) and tigh-

ten the ﬂow cup

by turning it clockwise .

For rust protection you can spray sewing ma-

chine oil through the device after cleaning.

Lubricate all moving parts from time to time.

After cleaning the needle, the thread and seal

must be lightly treated with grease.

Do not use any lubricants containing silicone.

Only store compressed air tools in dry areas.

Service

Compressed air-oper-

ated equipment should only be re

paired

by qualified specialists and with origi

nal

spare parts. This will ensure that devices

remain safe.

Note: Spare parts not listed (e.g. carbon brushes,

switches) can be ordered through our call centre.

Warranty

The warranty for this appliance is for 3

years from the date of purchase. The ap-

pliance has been manufactured with care

and meticulously examined before deliv-

ery. Please retain your receipt as proof

of purchase. In the event of a warranty

claim, please make contact by telephone

with our Service Department. Only in this

way can a post-free despatch for your

goods be assured.

The warranty covers only claims for material and

maufacturing defects, but not for transport damage,

for wearing parts or for damage to fragile compo-

nents, e.g. buttons or batteries. This product is for pri-

vate use only and is not intended for commercial use.

The warranty is void in the case of abusive and im-

proper handling, use of force and internal tampering

not carried out by our authorized service branch. Your

statutory rights are not restricted in any way by this

warranty.

The warranty period will not be extended by repairs

made unter warranty. This applies also to replaced

and repaired parts. Any damage and defects extant

on purchase must be reported immediately after

unpacking the appliance, at the latest, two days after

the purchase date. Repairs made after the expiration

of the warranty period are subject to payment.

Service Great Britain

Tel.: 0871 5000 720

(0.10 GBP/Min.)

e-mail: kompernass@lidl.co.uk

IAN 96898

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PDFP 500 B2 - IAN 96898 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PDFP 500 B2 - IAN 96898

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info