Bedienungsanleitung Parkside PDMS A1 - IAN 43105 (Seite 31 von 34) (Französisch)

595411

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

PDMS A1

Operation

Switching the grinder on and oﬀ

Use the pressure reducer to set the correct working

pressure. Operate the appliance at a working

pressure of maximum 6.3 bar.

NOTE

►

An excessive working pressure does not im-

prove performance, but only increases com-

pressed air consumption and increases wear

on the appliance.

♦ Switch the grinder on and increase or decrease

the speed by turning the speed setting wheel

(labelled 0 / 1) appropriately (see Figure 2).

Fig. 2

Maintenance and Cleaning

WARNING! RISK OF INJURY!

Disconnect the grinder from the

compressed air supply before

carrying out maintenance work.

NOTE

In order to guarantee correct functioning and

long service life of the grinder, please observe

the following information:

■ Suﬃ cient and continuous intact oil lubrication is

of decisive importance for optimum functioning.

■ Check the idle speed regularly and after any

maintenance is performed:

use a rev counter and perform the measurement

without any clamped tools. The idle speed may

not be exceeded under any circumstances at a

residual pressure of 6.3 bar.

■ Clean any dirt from the air inlet on the com-

pressed air mini grinder.

■ To protect against contamination, the com-

pressed air mini grinder should packed away in

the supplied carrying case after each use.

■ Do not pack the appliance away until it

has cooled down completely.

■ If, despite this, the compressed air mini grinder

has become dirty, observe the following instruc-

tions when cleaning.

■ Only use a dry, soft cloth or compressed air to

clean the grinder.

■ Never use sharp or scratchy cleaning agents

under any circumstances.

Disposal

The packaging consists of environmentally

friendly material. It can be disposed of in

the local recycling containers.

Do not dispose of the appliance in the normal

domestic waste.

Your local community or municipal authorities can

provide information on how to dispose of the worn-

out appliance.

Warranty and service

The warranty provided for this appliance is

3 years from the date of purchase.

This appliance has been manufactured with

care and inspected meticulously prior to

delivery. Please retain your receipt as proof

of purchase. In the event of a warranty claim,

please contact your Customer Service by tele-

phone. This is the only way to guarantee free

return of your goods.

The warranty only covers claims for material and

manufacturing defects, not for transport damage,

wearing parts or for damage to fragile components

such as switches or batteries. This appliance is in-

tended solely for private use and not for commercial

purposes. The warranty is deemed void if this product

has been subjected to improper or inappropriate

handling, abuse or modiﬁ cations which were not

carried out by one of our authorised service centres.

Your statutory rights are not restricted in any way by

this warranty. The warranty period is not prolonged

by repairs made under the warranty. This also

applies to replaced and repaired parts. Damage

and defects present at the time of purchase must be

reported immediately after unpacking, or no later

IB_43105_PDMSA1_LB2.indb 28IB_43105_PDMSA1_LB2.indb 28 14.05.14 11:1614.05.14 11:16

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PDMS A1 - IAN 43105 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PDMS A1 - IAN 43105

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info