Bedienungsanleitung Parkside PDRS - IAN 43095 (Seite 31 von 39) (Deutsch, Englisch, Holländisch)

595412

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

31 GB

Introduction

Introduction / General safety rules

Technical Data

Max. torque: 61 Nm

Operating pressure: 6.3 bar

Speed: 150 rpm

Weight: 1120 g

Noise and vibration

Noise ratings were determined according to

EN 15744. Vibration ratings were determined

according to ISO 28927-2.

Vibration

(per EN 28927-2): 2.63 m / s

Uncertainty K: 1.5 m / s

Noise level L

: 91.9 dB(A)

Uncertainty K

: 3 dB

Sound power level L

: 102.9 dB(A)

Uncertainty K

: 3 dB

pC, peak

= 105.3 dB(A)

Uncertainty K = 3 dB

Scope of delivery

1 Air ratchet set

1 Plug nipple with gasket

7 Socket key (10, 11, 13, 14, 15, 17, 19 mm)

1 Extension

3 Bits (PH 2.3, SL 5.5)

1 U-joint

1 Bit holder

1 Oil reservoir

1 Carrying case

1 Instructions for use

General safety rules

Note: When used in the following text, the terms

„compressed air unit“ or „device“ refer to the com-

pressed air unit speciﬁed in these instructions for use.

Basic safety measures must be

followed when using compressed air units to eliminate

the risk of ﬁre, electric shock and personal injury.

Be sure to read and follow the notices within these

operating instructions prior to using the equipment

and store them in a safe location.

The manufacturer assumes no liability for damages

or personal injury resulting from failure to follow these

operating instructions.

Persons (including children) who lack the knowl-

edge or experience to use the tool or whose

physical, sensory or intellectual capacities are

limited must never be allowed to use the tool

without supervision or instruction by a person

responsible for their safety.

Ensure children do not play with the device.

RISK OF INJURY! Before

performing maintenance tasks, disconnect the

compressed air supply.

EXPLOSION HAZARD! Never

use petrol or other ﬂammable liquids

to clean the air tool! Sparks could

ignite residual vapours inside the compressed

air unit resulting in the compressed air unit ex-

ploding. Do not use the device in explosive en-

vironments with ﬂammable liquids, gasses or dust.

Never work on materials which are or could

potentially be highly ﬂammable or explosive.

Only use the equipment in areas of application

for which it was designed!

Do not overburden the device.

Never use hydrogen, oxygen, carbon

dioxide or other bottled gasses to

power this tool as doing so may re-

sult in an explosion and thus may cause severe

injuries.

Regularly maintain and clean the device as

speciﬁed (see chapters „Maintenance“ and

„Cleaning and care“).

Inspect the device for any damage before use.

Always make sure that the device is in perfect

condition each time before use.

Always be attentive! Unexpected movement of

the device may cause hazards.

Avoid placing your body in an unnatural position.

Keep proper footing and balance at all times.

By doing this you will be in a better position to

control the compressed air unit in unforeseen

circumstances.

43095_par_Druckluft-Ratschenschrauber PDRS_content_DE_NL.indd 31 28.05.14 11:27

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PDRS - IAN 43095 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info