Bedienungsanleitung Parkside PDRS - IAN 43095 (Seite 34 von 39) (Deutsch, Englisch, Holländisch)

595412

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

34 GB

General safety rules

Maintain a balanced body position and secure

footing.

n cases where the means to absorb the reacti

torque are requested, it is recommended to use

a suspension arm whenever possible. If that is

not possible, side handles are recommended for

straightcase and pistol-grip tools. Reaction bars

are recommended for angle nutrunners. In any

case, it is recommended to use a means to ab-

sorb the reaction torque above 4 Nm for straight

tools, above 10 Nm for pistol-grip tools, and

above 60 Nm for angle nutrunners.

Release the start-and-stop device in the case of

an interruption of the energy supply.

Use only lubricants recommended by the manu-

facturer.

Fingers can be crushed in open-ended crow-foot

nutrunners.

Do not use in conﬁned spaces and beware of

crushing hands between tool and workpiece,

especially when unscrewing.

Repetitive motions hazards

When using a power tool for, the operator can

experience discomfort in the hands, arms, shoul-

ders, neck, or other parts of the body.

While using an assembly power tool for threaded

fasteners, the operator should adopt a comfort-

able posture while maintaining secure footing

and avoiding awkward or oﬀ-balanced postures.

The operator should change posture during ex-

tended tasks, which can help avoid discomfort

and fatigue.

If the operator experiences symptoms such as

ersistent or recurring discomfort, pain, throbbi

ng,

aching, tingling, numbness, burning sensations

or stiﬀness, these warning signs should not be

ignored. The operator should tell the employer

and consult a qualiﬁed health professional.

Accessory hazards

Disconnect the assembly power tool for threaded

fasteners from the energy supply before chang-

ing the inserted tool or accessory.

Do not touch sockets or accessories during im-

pacting, as this increases the risk of cuts, burns

or vibration injuries.

Use only sizes and types of accessories and con-

sumables that are recommended by the assembly

power tool for threaded fasteners manufacturer;

do not use other types or sizes of accessories

and consumables.

Use only impact-wrench-rated sockets in good

condition, as poor condition or hand sockets

and accessories used with impact wrenches

can shatter and become a projectile.

Workplace hazards

Slips, trips and falls are major causes of work-

lace injury. Be aware of slippery surfaces ca

used

by the use of the tool and also of trip hazards

caused by the air line or hydraulic hose.

Proceed with care in unfamiliar surroundings.

Hidden hazards, such as electricity or other util-

ity lines, can exist.

The assembly power tool for threaded fasteners

is not intended for use in potentially explosive

atmospheres and is not insulated against com-

ing into contact with electric power.

Make sure there are no electrical cables, gas

pipes, etc., that can cause a hazard if damaged

by use of the tool.

Dust and fume hazards

Dust and fumes generated when using assembly

power tools for threaded fasteners can cause

ill health (for example cancer, birth defects,

asthma and / or dermatitis); risk assessment and

implementation of appropriate controls for these

hazards are essential.

Risk assessment should include dust created by

the use of the tool and the potential for disturb-

ing existing dust.

Direct the exhaust so as to minimize disturbance

of dust in a dust-ﬁlled environment.

Where dust or fumes are created, the priority

shall be to control them at the point of emission.

General safety rules

43095_par_Druckluft-Ratschenschrauber PDRS_content_DE_NL.indd 34 28.05.14 11:27

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PDRS - IAN 43095 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info