Bedienungsanleitung Parkside PDS 290 A1 - IAN 102965 (Seite 10 von 61) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Schwedisch, Finnisch)

595338

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

10 GB/IE

Removal:

Pull the hose of the dust extraction device oﬀ

the adapter for external vacuum extraction

Turn anticlockwise to unlock the dust extraction

port

Pull oﬀ the adapter for external vacuum extrac-

tion

(with the reducer piece

if used).

Attaching / detaching

sanding sheets

Always pull the mains plug is out

of the socket before doing any work on the device.

Attaching:

Sanding sheets are attached to the backing plate

by means of the hook and pile fastening.

Detaching:

Simply pull the sanding sheet oﬀ the backing

plate

(see Fig. B).

Materials:

Wood (sanding sheets included), paint*, stone*

*depending on the sanding sheet

Turn the backing plate

in 60° steps

Always pull the mains plug out

of the socket before doing any work on the device.

Turn the backing plate

of the delta sander

in 60° steps until it engages in the desired

position (see Fig. C).

Sanding output and surfaces:

The shape of the delta sander allows you to sand

workpieces even in their diﬃcult to access places,

corners and edges (see Fig. D).

Sanding performance and surface quality depend

on the grade of sanding sheet and the oscillation

speed setting.

Always use sanding sheets with grades that

are suitable for the particular surface you are

sanding. The speed selected should also be

appropriate to the task undertaken.

Advice on use

Switch the device on before placing it against

the workpiece.

Apply light sanding pressure only.

Advance the device at an even rate.

Change sanding sheets at the appropriate time.

Do not work on diﬀerent types of material using

the same sanding sheet (e.g. wood and then

metal). To achieve the best sanding results you

should use unworn, undamaged sanding sheets.

Clean the sanding sheet from time to time with

a vacuum cleaner.

Maintenance and cleaning

Always pull the mains plug out

of the socket before doing any work on the device.

The delta sander is maintenance-free.

Clean the device frequently. This should be done

immediately after you have ﬁnished using it.

For cleaning the housing use a dry cloth only.

Remove any adhering sanding dust with a nar-

row paint brush.

Never any kind of sharp object or petrol, sol

vents

or cleaning agents that might attack plastic. Do

not allow any liquids to enter the inside of the

device.

Always keep the ventilation slots

clear.

Service centre

Have your device re-

paired only by qualified specialist

personnel using original manufacturer

parts only. This will ensure that your device

remains safe to use.

If the plug or mains

lead needs to be replaced, always have

the replacement carried out by the

manufacturer or its service centre. This

will ensure that your device remains safe to use.

Preparing for use / Maintenance and cleaning / Service centre Service centre / Warranty / Disposal

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PDS 290 A1 - IAN 102965 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info