Bedienungsanleitung Parkside PDS 290 B2 - IAN 273101 (Seite 8 von 47) (Deutsch, Englisch, Holländisch, Dänisch, Französisch)

679210

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

8 GB/IE

parts. Loose clothes, jewellery or long hair

can be caught in moving parts.

g) If devices are provided for the connec-

tion of dust extraction and collection

facilities, ensure these are connected

and properly used. Use of dust collection

can reduce dust-related hazards.

4. Power tool use and care

a) Do not force the power tool. Use the

correct power tool for your applica

tion.

The correct power tool will do the job better

and safer at the rate for which it was designed.

b) Do not use the power tool if the switch

does not turn it on and off. Any power

tool that cannot be controlled with the switch is

dangerous and must be repaired.

c) Pull the mains plug out of the socket

and / or remove the rechargeable bat-

tery before you make any adjustments

to the device, change accessories or

when the device is put away. This pre-

caution is intended to prevent the device from

unintentionally starting.

d) Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tool or these

instructions to operate the power tool.

Power tools are dangerous in the hands of un-

trained users.

e) Maintain power tools. Check for mis-

alignment or binding of moving parts,

breakage of parts and any other con-

dition that may affect the power tool’s

operation. If damaged, have the power

tool repaired before use. Many accidents

are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are

easier to control.

g) Use the power tool, accessories and

tool bits etc. in accordance with these

instructions, taking into account the

working conditions and the work to

be performed. Use of the power tool for

operations diﬀerent from those intended could

result in a hazardous situation.

5. Service

a) Have your power tool serviced by a

qualified repair person using only

iden-

tical replacement parts. This will ensure

that the safety of the power tool is maintained.

Safety advice relating

speciﬁcally to delta sanders

Securely support the workpiece. Use clamps or

a vice to grip the workpiece ﬁrmly. This is much

safer than holding it in your hand.

Never support yourself by placing your hands

near or in front of the device or the workpiece

surface. A slip can result in injury.

If a dangerous situation arises, pull the mains

plug immediately out of the mains socket.

Always work with the mains lead leading

away from the rear of the device.

DANGER OF FIRE FROM FLYING

SPARKS!

Abrading metal creates ﬂying sparks. For this

reason, always make sure that nobody is placed

in any danger and that there are no inﬂammable

materials near the working area.

TOXIC DUST! Dust from

materials such as lead paint, some types of

wood, minerals and metal, can be noxious.

Touching or inhaling this type of dust can pre-

sent a danger to the user or persons nearby.

Wear protective glasses and a dust

mask!

When sanding wood and in particular when work-

ing on materials that give rise to dusts that are

hazardous to health, the sander must be connect-

ed to a suitable external dust extraction device.

Ensure that there is adequate ventilation when

working on plastic, paint, varnish etc.

Avoid sanding paints containing lead or other

substances hazardous to health.

Do not work on materials containing asbestos.

Asbestos is a known carcinogen.

General power tool safety warnings / Preparing for useGeneral power tool safety warnings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PDS 290 B2 - IAN 273101 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info