Bedienungsanleitung Parkside PDSS 310 A1 - IAN 96878 (Seite 9 von 94) (Dänisch, Französisch, Schwedisch, Finnisch)

595413

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

9 GB/IE

General safety instructions for air tools

in your hand or pressing it against your body

will not allow for safe use of the equipment.

ATTENTION! An undersized com-

pressed air system may reduce the

eﬃciency of your equipment.

Risks due to projecting parts

If the work piece, one of the accessories or the

tool itself breaks, parts may be projected at

great speeds.

Always wear impact-resistant eye protection

when using the machine for screw connections.

The level of protection required should be asses

for each individual application.

Be sure the work piece is properly secured.

Risks from gripping / winding

Risks from gripping / winding may result in suf-

focation, scalping and / or cuts if loose clothing,

jewellery, necklaces, hair or gloves are not kept

away from the machine and its accessories.

Gloves may become tangled in the rotating

drive, which may result in injuries or fractures in

ﬁngers.

Rotating drives and extensions may easily catch /

wind rubberised or metal reinforced gloves.

Never wear loose gloves or gloves with cut or

worn ﬁngers.

Never hold on to the drive, collect or the drive

extension.

Keep hands away from the rotating drive.

Operating hazards

When using the machine the operator‘s hands

may be exposed to crushing, impact, cut, abra-

sion and heat hazards. Wear suitable gloves

to protect hands.

The operator and maintenance personnel must

be physically capable to manage the weight

and power of the machine.

Hold the machine correct: be prepared to coun-

teract typical or sudden movements – keep both

hands ready.

Be sure your body is well balanced and maintain

a solid stance.

If tools are required to absorb the reaction tor-

que, use a suspension attachment whenever

possible. If this is not possible, we recommend

side handles for machines with straight handle

and pistol grip. At any rate we recommend

using tools to absorb if it is greater than 4 Nm

for machines with straight handles, greater

than 10 Nm for machines with pistol grip and

greater than 60 Nm for oﬀset screwdrivers.

In the event of power failure release the start-

or stop control.

Only use the lubricants recommended by the

manufacturer.

Hex nut drivers with open ﬂathead can crush

ﬁngers.

Do not use the tool in tight spaces and be sure

your hands are not crushed between the machine

and work piece, especially when unscrewing.

Hazards due to

repetitive motions

When using a machine for screw connections

the operator may experience discomfort in

hands,

arms, shoulders, neck or other body parts whilst

performing work-related tasks.

Maintain a comfortable position whilst using

this tool, be mindful of a secure grip and avoid

awkward positions or positions making it diﬃ-

cult to maintain your balance. The operator

should

change his posture during extended periods of

use, which may help to prevent discomfort and

fatigue.

If the operator experiences symptoms such as

persistent malaise, discomfort, palpitations, pain,

tingling, numbness, a burning sensation or stiﬀ-

ness, these warning signs should not be ignored.

The user should consult a qualiﬁed healthcare

professional.

96878_par_Druckluft-Schlagschrauber PDSS 310 A1_content_GB_IE_FI_SE_DK_BE.indd 9 23.04.14 15:54

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PDSS 310 A1 - IAN 96878 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PDSS 310 A1 - IAN 96878

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info