Bedienungsanleitung Parkside PDSSA 20-Li A1 - IAN 290754 (Seite 21 von 89) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

722873

Zoom out

Zoom in

Vorherige Seite

1/89

Nächste Seite

PDSSA 20-Li A1 GB│IE │ 17 ■

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits,

etc. in accordance with these instructions,

taking into account the working conditions

and the work to be performed. Use of the

power tool for operations diﬀerent from those

intended could result in a hazardous situation.

5. Use and handling of the cordless

electrical power tool

a) Charge a rechargeable battery unit using

only the charger recommended by the manu-

facturer. Chargers are often designed for a

particular type of rechargeable battery unit.

There is the danger of ﬁre if other types of

rechargeable battery units are used.

b) Only the rechargeable battery units supplied

are to be used with an electrical power tool.

The use of other rechargeable battery units may

lead to the danger of injury or ﬁre.

c) When they are not being used, store re-

chargeable battery units away from paper-

clips, coins, keys, nails, screws or other small

metal objects that could cause the contacts

to be bridged. Short-circuiting the contacts of

a rechargeable battery unit may result in heat

damage or ﬁre.

d) Fluids may leak out of rechargeable battery

units if they are misused. If this happens, avoid

contact with the ﬂuid. If contact occurs, ﬂush

the aﬀected area with water. Seek additional

medical help if any of the ﬂuid gets into your

eyes. Escaping battery ﬂuid may cause skin

irritation or burns.

CAUTION! RISK OF EXPLOSION!

Never charge non-rechargeable

batteries!

Protect the rechargeable battery

from heat, for example from continu-

ous exposure to sunlight, ﬁre, water

and moisture. There is a risk of explo-

sion.

6. Service

a) Have your power tool serviced by a qualiﬁed

repair person using only identical replacement

parts. This will ensure that the safety of the

power tool is maintained.

Safety instructions speciﬁcally for

impact screwdrivers

■Wear hearing protection when impact screw-

ing. Exposure to loud noise can lead to hearing

loss.

■Secure the workpiece! A workpiece securely

held by a clamping device or vice is much safer

than one held in your hand.

■Hold the power tool ﬁrmly. High torques can

occur for brief periods while tightening and

loosening screws.

■Wait until the power tool has come to a stand-

still before putting it down. The tool can jam,

this leading to loss of control of the appliance.

■Hold the power tool by the insulated gripping

surfaces when performing an operation in

which the screw or attached tool could come

into contact with hidden wiring. Contact

between the screw or attached tool and a live

wire may cause exposed metal parts of the

power tool to become live and give the opera-

tor an electric shock.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PDSSA 20-Li A1 - IAN 290754 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info