Bedienungsanleitung Parkside PDWS 8 A1 - IAN 96956 (Seite 24 von 28) (Deutsch, Englisch, Holländisch)

595407

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

24 GB

… / … / … / Cleaning and Care / Information about warranty and service processing

General safety instructions for air tools

Protect hoses from kinks, constrictions, solvents

and sharp edges. Keep hoses away from heat,

oil and rotating parts.

Ensure that the hose clamps are always ﬁrmly

secured. Hose clamps that have been insuﬃ-

ciently tightened or damaged could allow air

to escape in an uncontrolled manner.

Replace damaged hoses immediately. A dam-

aged supply line may result in the air hose ﬂap-

ping about and may result in injuries.

If the mains power cable of the device is dam-

aged, it has to be replaced by the manufacturer

or its service department or a similarly qualiﬁed

person in order to avoid hazards.

Do not use the device when tired or under the

inﬂuence of drugs, alcohol or medications.

One moment of carelessness when using the

device may result in serious injuries.

Do not directly inhale the exhaust air. Keep

eyes away from exhaust air. Exhaust air from

the compressed air device may contain water,

oil, metal particles or contamination from inside

the compressor. This may result in injury to health.

BE CAREFUL WHEN YOU

PUT DOWN THE DEVICE! Always put down

the device so it does not come into contact with

the trigger. This could potentially result in acci-

dental activation of the device, which again

could result in hazards.

Only use suitable accessories. These may be

purchased from the manufacturer. Using non-

OEM accessories may result in hazards.

Only use ﬁltered and regulated compressed

air. Dust, caustic vapours and/or moisture may

damage the motor of an air tool.

The hose must be designed for pres-

sures of at least 8.6 bar or 125 PSI,

but at least 150 % of the maximum

pressure generated in the system.

The tool and supply line must be

equipped with a hose coupling to

completely remove pressure when

disconnecting the coupling hose.

DANGER! Avoid contact with live lines. This

device is not insulated against electric shock.

DANGER OF INJURY! High

working pressures can give rise to recoil forces

that under certain conditions can result in danger

from continuous loading.

If you are inexperienced in the use of this type

of device, you should seek out information or

training to learn how to handle it safely.

DANGER OF STAB

WOUNDS! Do not treat an injection as a sim-

ple cut. A high pressure jet may inject toxins into

the body and cause serious injuries. If the spray

is injected into the skin, seek medical help im-

mediately.

Do not modify this device in any way without

the manufacturer‘s approval.

Only use the device with the speciﬁed pressure

(2–9 bar).

Disconnect the tool from the air supply after

each use and when not in use.

Discontinue use if the tool leaks or is in need of

repair.

Never connect the tool to an air hose with

pressure exceeding 9 bar.

Keep your working area clean and well lit.

Untidy or poorly lit working areas can lead to

accidents. Doing so will allow you better con-

trol of the device, particularly under unforeseen

circumstances.

Only have the device repaired

by qualiﬁed specialist personnel using OEM

spare parts. This will ensure that your device

remains safe to use.

Keep children and other individuals away from

the device during use. Distractions can cause

you to lose control of the device.

Wear suitable clothing. Do not wear loose

clothing or jewellery. Keep your hair, clothing

and gloves clear of moving parts. Loose cloth-

ing, jewellery or long hair can become trapped

in moving parts.

Put down trigger and device in the event of un-

expected compressor failure.

If possible, use a condensate trap or drain the

hoses and pipes of condensate (water) regu-

larly before and during the use compressed air

devices (water).

ATTENTION! An undersized com-

pressed air system may minimise the

eﬃciency of your device.

96956_par_Druckluft Wasserstrahler PDWS 8 A1_Content_DE_NL.indd 24 24.04.14 08:20

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PDWS 8 A1 - IAN 96956 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PDWS 8 A1 - IAN 96956

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info