Bedienungsanleitung Parkside PDWS 8 A1 - IAN 96956 (Seite 25 von 28) (Französisch)

595407

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

25 GB

… / … / … / Cleaning and Care / Information about warranty and service processing

General safety instructions

for compressed air

water jets

Never point the device at yourself, other per-

sons or animals. The water leaves the device at

high pressure and speed. This could present a

major hazard.

Preparations for use

Connecting garden and

compressed air hoses

Wear your protective clothing and put on your

safety goggles! Otherwise there is a risk of injury.

Connect your garden hose to the water con-

nection

of the device.

Note: At this point, the device is equipped

with a common click-plug-in system.

If you cannot simply press the hose onto the

connection, please check the compatibility of

the connections.

Never attempt to join the two connections using

excessive force. You will be certain to cause

damage.

Use a ¼" plug-in coupling to connect the com-

pressed air hose to the compressed air supply

Ensure at all times that the compressed air hose

does not handicap you in your work.

Operating the water supply

Open the main water supply.

Brieﬂy activate the extractor

on the device.

The water leaves the device at high speed.

Only tighten the extractor partially

to regu-

late the air ﬂow and the water quantity leaving

the device.

Vary the water jet by turning the nozzle to the

right or to the left (see ﬁg. B).

Note: You can change the pressure of your

compressor as you wish to adapt it to the cur-

rent requirements.

However, note that the force of the water jet

will be immense if you increase the pressure of

the compressor considerably.

Ensure that you cause no damage by directly

the jet at unstable material.

Never point the device at yourself, other per-

sons or animals.

After initial use

Once the task has been ﬁnished the device must be

disconnect from the compressed air supply

Brieﬂy activate the extractor

on the device

to release any compressed air remaining in the

device.

Now pull back the safety mechanism of the con-

nection coupling on your compressed air hose.

Now release the hose.

Be careful when putting down

the device. Always put down the device Always

put down the device so it does not come into

contact with the extractor

. This could poten-

tially result in accidental activation of the device,

which again could result in hazards.

Cleaning and Care

Loosen the compressed air connection.

Clean the device with a lightly moistened cloth.

Do not use corrosive or aggressive cleaning

agents.

Information about warranty

and service processing

Creative Marketing

Consulting GmbH warranty

Dear customer, the warranty for this device is 3 years

from the date of purchase. In the event of product

defects you have legal rights against the retailer of

this product. Your statutory rights are not limited in

any way by our warranty detailed below.

General safety instructions for air tools

96956_par_Druckluft Wasserstrahler PDWS 8 A1_Content_FR.indd 25 17.04.14 16:21

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PDWS 8 A1 - IAN 96956 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PDWS 8 A1 - IAN 96956

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info