Bedienungsanleitung Parkside PES 200 B1 - IAN 88931 (Seite 22 von 29) (Deutsch, Englisch, Holländisch)

595294

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

22 GB

Introduction / General safety advice for electrical power toolsIntroduction

Electric Scraper PES 200 B1

Introduction

We congratulate you on the purchase of your new

device. You have chosen a high quality product.

The instructions for use are part of the product. They

contain important information concerning safety,

use and disposal. Before using the product, please

familiarise yourself with all of the safety information

and instructions for use. Only use the unit as descri-

bed and for the speciﬁed applications. If you pass

the product on to anyone else, please ensure that

you also pass on all the documentation with it.

Intended Utilisation

The appliance is suitable for the removal and abra-

sion of coverings such as carpets, felts, cork sheets

and plaster on small areas. It is also intended for

removing residues of adhesives, paints and ﬁllers,

for the smoothing of coarse surfaces as well as for

carvings on soft woods. Any other use of, and

modiﬁcation to, the appliance is deemed to be

improper usage and may result in serious physical

injury. The manufacturer declines to accept respon-

sibility for damage(s) arising out of usage contrary

to the instructions speciﬁed below. The appliance is

not intended for commercial application.

Fittings

ON / OFF switch / Stroke rate preselector

Tool arrestor

Tool receptor

Tool attachment

Knife / Scraper attachment (oﬀset)

Knife / Scraper attachment (straight)

Spatula attachment

Chisel attachment

Carving chisel attachment

Items supplied

1 Electric Scraper PES 200 B1

1 Knife / Scraper attachment (oﬀset)

1 Knife / Scraper attachment (straight)

1 Spatula attachment

1 Chisel attachment

1 Carving chisel attachment

1 Operating manual

Technical Data

Rated voltage: 230 V

50 Hz

Nominal power consumption:

200 W

Nominal stroke rate: Level I: n

6500 min

-1

Level II: n

7500 min

-1

Level III: n

8500 min

-1

Stroke: ca. 2 mm

Protection class: II /

Noise and vibration data:

Measured values for noise are determined in accor-

dance with EN 60745. The A-weighted noise level

of the electrical power tool are typically:

Sound pressure level: 77.50 dB(A)

Sound power level: 88.50 dB(A)

Uncertainty K: 3 dB

Wear ear protection!

Evaluated acceleration, typical:

Hand / arm vibration a

= 2.066 m / s

Uncertainty K = 1.5 m / s

The vibration level speciﬁed in

these instructions was measured in accordance with

an EN 60745 standardised measurement process

and can be used to compare equipment. The vibra-

tion emission value speciﬁed can also serve as a

preliminary assessment of the exposure.

The vibration level will change according to the ap-

plication of the electrical tool an in some cases may

exceed the value speciﬁed in these instructions. Re-

gularly using the electric tool in such a way may

make it easy to underestimate the vibration.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PES 200 B1 - IAN 88931 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PES 200 B1 - IAN 88931

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info