Bedienungsanleitung Parkside PES 200 B1 - IAN 88931 (Seite 33 von 37) (Französisch, Italienisch)

595294

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

33 GB

General safety advice for electrical power tools / Before taking tool into useGeneral safety advice for electrical power tools

firmly. This is much safer than holding it in

your hand.

Wear protective glasses! Pieces of mate-

rial may split oﬀ the workpiece and become

projectiles. This could cause injury.

Wear a dust mask! A dust mask must be

worn for prolonged work on wood or when

working on materials that give rise to hazard-

ous dusts.

Do not soak the materials or the area

to be worked with liquids containing

solvents. Unhealthy / poisonous gases may

develop from the heat generated by scraping.

Materials containing asbestos may

not be worked. Asbestos is considered to

be a carcinogen.

Under no circumstances should you

place your hands next to or in front of

the appliance or on the area to be

worked, you could be seriously injured if you

slip or stumble.

Always have the cable leading away to the

rear of the appliance.

In the event of danger, immediately remove the

plug from the power socket.

Original ancillaries / accessories

Use only the ancillaries and accessories

that are detailed in the operating in-

structions. The use of ancillaries and acces-

sories other than those recommended in the

operating instructions could lead to an increased

risk of personal injury for you.

Understood everything?

When you have made yourself familiar with

these general safety instructions for electrical

hand tool, then you can start with the work. You

will work at your safest when taking note of the

manufacturer‘s declarations and instructions.

Before taking tool into use

Attachment tools

The choice of the correct attachment tool is depend-

ant on the job to be done.

The supplied accessories are suitable for the most

widespread areas of application (see Figs. C, D, E,

F and G).

Knife / Scraper attachment (oﬀset)

Knife / Scraper attachment (straight), e.g. for

removing carpets, felts, cork sheets as well as

plaster and adhesive residues (see Fig. C, E)

Spatula attachment (ﬂat), e.g. for removing

paint residues, silicon and foams (see Fig. D)

Chisel attachment (ﬂat), e.g. for carving soft

woods (see Fig. F)

Carving chisel (13 mm), e.g. for carving in

softwoods (see Fig. G)

Changing attachments

Wear suitable protective gloves when inserting and

testing attachments tool

Notice: The curve / working edge of the attachment

tool

must always point downwards.

Inserting a tool attachment:

Push the tool lock

forwards to “UNLOCK”.

Insert the attachment tool

as far as it will go

in the tool receptor

(see Fig. A).

Push the tool lock

backwards to “LOCK” -

the tool attachment is locked.

Removing a tool attachment:

Push the tool lock

forwards to “UNLOCK”.

Remove the inserted tool attachment

from

the tool receptor

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PES 200 B1 - IAN 88931 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PES 200 B1 - IAN 88931

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info