Bedienungsanleitung Parkside PET 25 B1 - IAN 96267 (Seite 26 von 28) (Deutsch, Englisch, Holländisch)

576750

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

26 GB

Decrease impact force:

Turn the impact force controller

clockwise.

Use

Switching on and oﬀ

Set the ON / OFF switch

to position “I” to

switch on the device.

Set the ON / OFF switch

to position “0” to

switch oﬀ the device.

Stapling / nailing

Switch the device on by setting the ON / OFF

switch

to position “I”.

Press the device with its front plate

at the

point on the surface of the material where you

wish to staple or nail.

Press the trigger

NOTE: The integral safety lock in the front

plate prevents unintentional ﬁring.

Troubleshooting

Cause:

A staple or nail is blocking the device.

Solution:

Open the magazine slider

. This releases

the pretension. Release the screws on the front

plate

using the Allen key (Fig. D).

Remove the staple or nail.

Maintenance and cleaning

DANGER OF INJURY! Pull

the mains plug out of the mains socket before you

clean or maintain the device.

The electric nailer / stapler is designed to be main-

tenance-free.

Always keep the device clean, dry and free

from oil or grease.

Clean the device immediately after you have

ﬁnished using it.

Do not allow any liquids to enter the device.

Use a cloth to clean the housing. Never use

petrol, solvents or cleaning agents that might

attack plastic.

Service

Have your device

repaired at the service centre or by

qualified specialist personnel using

original manufacturer parts only. This

will ensure that your device remains safe to use.

If the plug or lead

needs to be replaced, always have

the replacement carried out by the

manufacturer or its service centre. This

will ensure that your device remains safe to use.

Note: Spare parts not listed (e.g. carbon brushes,

switches) can be ordered through our call centre.

Warranty

The warranty for this appliance is for 3

years from the date of purchase. The ap-

pliance has been manufactured with care

and meticulously examined before deliv-

ery. Please retain your receipt as proof

of purchase. In the event of a warranty

claim, please make contact by telephone

with our Service Department. Only in this

way can a post-free despatch for your

goods be assured.

The warranty covers only claims for material and

maufacturing defects, but not for transport damage,

for wearing parts or for damage to fragile compo-

nents, e.g. buttons or batteries. This product is for pri-

vate use only and is not intended for commercial use.

The warranty is void in the case of abusive and im-

proper handling, use of force and internal tamper-

ing not carried out by our authorized service branch.

… / … / Translation of the original declaration of conformity / ManufacturerBefore use / Use / Maintenance and cleaning / Service / Warranty

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PET 25 B1 - IAN 96267 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PET 25 B1 - IAN 96267

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info