Bedienungsanleitung Parkside PEXS 270 A1 IAN 56848 (Seite 41 von 52) (Englisch, Portugiesisch, Spanisch)

744070

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

41 GB/MT

To switch on intermittent operation mode:

j Press the ON / OFF switch

To switch off intermittent operation mode:

j Release the ON / OFF switch

Switching on continuous operation:

j Press the ON / OFF switch

, keep it pressed

down and press the locking button

Switching off after sustained operation:

j Press the ON / OFF switch

and then release it.

Working instructions

J Wait until the electric tool has stopped moving

before you put it down.

Grinding Surfaces

j Turn the electric tool on, place the entire grinding

surface on the substrate that is to be worked

on and move it with moderate pressure across

the workpiece (see Illustration B, C, D).

Note: The rate of metal removal and the

grinding pattern are essentially determined by

the grinding disc that has been selected and

the grinding pressure. Only grind-ing discs that

are in perfect condition will provide good

grinding performance.

j Please ensure that the grinding pressure is

even. An excessive increase in the grinding

pressure leads not only to a higher rate of met-

al removal, but also greater wear and tear on

the grinding disc.

j You should not use a grinding disc that has

been used for working metal for other materials.

Maintenance and Cleaning

WARNING!

RISK OF INJURY! Before

carrying out work on the appliance, always remove

the plug from the power socket.

The rotary sander is maintenance free.

j Clean the appliance regularly, preferably direct-

ly on completion of the task.

j Use a dry cloth to clean the device. Under no

circumstances should you use petrol, solvent or

cleaners which attack plastic.

j Keep the ventilation openings clear at all times.

Remove dust clinging to the sander

with a brush.

Service centre

WARNING!

Have your device re-

paired only by qualified specialist

personnel using original manufacturer

parts only. This will ensure that your device

remains safe to use.

WARNING!

If the plug or mains

lead needs to be replaced, always have

the replacement carried out by the

manufacturer or its service centre. This

will ensure that your device remains safe to use.

Warranty

The warranty for this appliance is for 3

years from the date of purchase. The ap-

pliance has been manufactured with care

and meticulously examined before deliv-

ery. Please retain your receipt as proof

of purchase. In the event of a warranty

claim, please make contact by telephone

with our Service Department. Only in this

way can a post-free despatch for your

goods be assured.

The warranty covers only claims for material and

maufacturing defects, but not for transport damage,

for wearing parts or for damage to fragile compo-

nents, e.g. buttons or batteries. This product is for pri-

te use only and is not intended for commercial use.

The warranty is void in the case of abusive and im-

proper handling, use of force and internal tamper-

ing not carried out by our authorized service branch.

Commissioning / Working … / Maintenance …/ Service centre / Warranty

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PEXS 270 A1 IAN 56848 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PEXS 270 A1 IAN 56848

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info