Bedienungsanleitung Parkside PEXS 270 A1 IAN 61097 (Seite 39 von 51) (Englisch, Italienisch, Portugiesisch, Spanisch)

744143

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

40 GB/MT

J Permit the switched off appliance to

come to a complete standstill before

putting it down.

J The appliance must always be kept

clean, dry and free of oil or grease.

J Keep your workplace clean. Material

mixtures are particularly dangerous. Light met-

al dust can burn or explode.

J Do not use the electric tool with a

damaged lead. Do not touch the damaged

lead and remove the mains plug if the lead be-

comes damaged while you are work-ing with

the device. Damaged leads increase the risk of

an electric shock.

Original accessories / tools

J Use only the accessories detailed in

the operating instructions. The use of in-

serted tools or accessories other than those

recommended in the operating instructions

could lead to you suﬀering an injury.

Before use

Selecting the Grinding Disc

Metal Removal and Surface:

The rate of metal removal and the surface quality

are determined by the grain size of the grinding disc.

j lease note that corresponding grinding discs

with diﬀerent grain sizes should be used for

processing diﬀerent materials.

Changing sanding sheets

WARNING!

RISK OF INJURY! Before

carrying out work on the appliance, always re-

move the plug from the power socket.

The rotary sander is ﬁtted with a velcro rapid attach-

ment, making possible a quick and easy exchange

of sanding sheets.

j Lift the grinding disc

at the side and pull it oﬀ

from the backing pad

in order to remove it.

Note: Before securing a new sanding sheet

remove all dust and dirt from the sander plate

j Ensure that the openings in the sanding sheet

concur with the boreholes of the sanding plate

Dust / Swarf Removal by Suction

J Please note the “Safety instructions” section.

Removal by Suction with Dust Collector:

j Push the dust collector

completely onto the

device.

j In order to empty the dust collector

pull it

oﬀ the device.

Note: Empty the dust collector

in good

time and regularly in order to ensure the opti-

mum removal of dust by suction.

External Exhaust Suction (see Illustration A):

Connection:

j Push the adapter for external exhaust suction

on to the exhaust nozzle

and turn it clock-

wise to ﬁx it in place. If necessary, use the re-

ducing piece

by pushing it into the adapter

for external exhaust suction

j Push the hose of an approved suction device

(e.g. a workshop vacuum cleaner) on to the

adapter for external exhaust suction

, using

the reducing piece if necessary

Removal:

j Pull the hose of the suction device oﬀ the

adapter for external exhaust suc-tion

j Turn the adapter for external exhaust suction

in an anticlockwise direction and pull it oﬀ with

the reducing piece

if necessary.

Commissioning

Switching on and oﬀ

Note! Always switch the rotary sander on before

applying it to the material to be worked, then make

contact with it.

When operating the device you can select between

intermittent or continuous operation mode:

General safety advice for electrical power tools / Before use / Commissioning

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PEXS 270 A1 IAN 61097 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PEXS 270 A1 IAN 61097

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info