Bedienungsanleitung Parkside PFBS 12 B3 - IAN 321231 (Seite 25 von 116) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

773462

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

PFBS 12 B3

■ 22 │ GB│IE

Safety instructions for all applica-

tions

General safety instructions for grinding, sand-

paper sanding, working with wire brushes,

polishing, milling and abrasive cutting:

a) This power tool is intended for use as a grinder,

sandpaper sander, wire brush, polisher, milling

machine and abrasive cutting machine.

Please follow all safety instructions, instruc-

tions, diagrams and data that you receive

with the appliance. If you do not observe the

following instructions, this can lead to electrical

shock, ﬁre and/or serious injuries.

b) Do not use any accessories that have not

been provided or recommended by the manu-

facturer for this power tool. Just because you

can attach the accessories to your power tool,

does not ensure they are safe to use.

c) The permissible speed of the accessory tool

used must be at least as high as the maximum

speed speciﬁed for the power tool. Accessories

that rotate faster than the permissible rate can

break and throw pieces into the air.

d) The external diameter and thickness of the

accessory tool used must comply with the

dimensions of your power tool. Incorrectly

dimensioned accessory tools cannot be suﬃ-

ciently shielded or controlled.

e) Grinding discs, sanding drums or other acces-

sories must match the grinding spindle or

collet chuck of your power tool exactly.

Accessory tools which do not ﬁt precisely into

the take-up of the power tool will rotate unevenly,

vibrate severely and can lead to a loss of control.

f) Discs, grinding cylinders, cutting tools or

other accessories mounted on a mandrel must

be completely inserted in the collet or chuck.

Any "protrusion" or exposed parts of the

mandrel between the grinding tool and the

collet or chuck must be kept to a minimum. If

the mandrel is not suﬃciently tightened or the

grinding tool protrudes too far, the tool could

come loose and be thrown out at high speed.

g) Never use damaged accessory tools. Before

each use, check accessory tools such as

grinding discs for chips or cracks, sanding

drums for cracks or excessive wear and tear

and wire brushes for loose or broken wires.

If the power tool or the accessory tool in use

is dropped, check to see if it is damaged or

use an undamaged accessory tool. When

you have checked and inserted the accessory

tool, ensure that you and any other people

in the vicinity remain outside of the range of

the rotating accessory tool and allow the tool

to rotate at maximum speed for one minute.

Damaged accessory tools usually break during

this test period.

h) Wear personal protective equipment.

Depending on the application, ensure that

you use full face protection, eye protection

or goggles. If required, use a dust mask, ear

protectors, protective gloves or a special

apron to protect you from grindings and

material particles. Protect your eyes from

ﬂying debris that may be created during certain

applications. Dust or ﬁlter masks must be used

to ﬁlter any dust created by the application.

If you are exposed to loud noise for any length

of time, you may suﬀer hearing loss.

i) Ensure that other people remain at a safe

distance from your workspace. Anyone who

enters the workspace must wear personal

protective equipment. Fragments of the work-

piece or broken accessory tools can ﬂy oﬀ

and cause injury – even outside the immediate

working area.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PFBS 12 B3 - IAN 321231 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info