Bedienungsanleitung Parkside PFDS 33 A1 - IAN 280331 (Seite 22 von 119) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

684857

Zoom out

Zoom in

Vorherige Seite

1/119

Nächste Seite

PFDS 33 A1

■ 18

│

FLUX-CORED WIRE WELDER PFDS 33 A1

Introduction

Congratulations on the purchase of your new appliance. You have selected

a high-quality product. The operating instructions are part of this product.

They contain important information about safety, usage and disposal.

Before using the product, please familiarise yourself with all operating and

safety instructions. Use the product only as described and for the range of

applications speciﬁed. Please also pass these operating instructions on to

any future owner.

Intended use

The appliance is suitable for self-shielded ﬂux-core welding using an

appropriate wire. No additional gas is required. The protective gas is

contained in powdered form in the wire itself, is thus fed directly into the

arc and means that the appliance is not susceptible to wind and can be

used outside.

Only the ﬁller wire designed for this appliance may be used.

Proper use also involves compliance with the safety instructions as well as

the assembly instruction and the operating notes in the operating instruc-

tions.

Comply exactly with the applicable accident prevention regulations.

The appliance may not be used:

▯ in rooms with insuﬃcient ventilation,

▯ in damp or wet environments,

▯ in explosive atmospheres,

▯ for the purpose of thawing pipes,

▯ in the vicinity of people with heart pacemakers and

▯ in the vicinity of ﬂammable materials.

Use this appliance only as described in this instruction manual. All other

uses are deemed to be improper and may result in property damage or

even in personal injury.

The manufacturer is not liable for damages caused by improper or incorrect

use.

Residual risk

Even if you operate this appliance properly, there will still be residual risks.

The following risks can occur in the context of the design and construction

of this ﬂux-core welder:

▯ Eye injuries from ﬂashes,

▯ Touching hot parts of the appliance or the workpiece (burns),

▯ In the case of insuﬃcient protection, risk of accidents and burns due to

ﬂying sparks or slag,

▯ Harmful emissions of smoke and gases in the event of poor ventilation

or insuﬃcient extraction in closed rooms.

Reduce the residual risks by using the appliance carefully and in accordance

with all the instructions.

Features

Cover wire feed unit

Carrying strap

Catch

Mains plug

Earth cable with earth clamp

Cable assembly with direct connection

Torch button

Torch

Steel sleeve

Setting wheel for wire feed

MIN/MAX switch for welding current

1/2 switch for welding current

Main switch ON/OFF (incl. power indicator)

Overload protection control lamp

Torch nozzle (1.0 mm)

Torch nozzle (0.8 mm)

Flux-core wire spool (wire roll) Ø 0.9 mm/510 g

Chipping hammer with

steel brush

Welding mask after assembly, consisting of:

Protective plate

Protective glass catch

Mounting clip

Dark welding lens

Handle

Package contents

1 ﬂux-cored wire welder PFDS 33 A1

1 steel sleeve (pre-assembled)

3 weld nozzles ( 1 x 1.0mm pre-assembled; 1 x 0.8mm; 1 x 1.0mm)

1 chipping hammer with

steel brush

1 ﬂux-core wire Ø 0.9 mm/510 g

1 welding mask

1 carrying strap

1 set of operating instructions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PFDS 33 A1 - IAN 280331 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info