Bedienungsanleitung Parkside PHD 100 D2 - IAN 63638 (Seite 33 von 48) (Französisch)

595426

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

• Warning ! To ensure machine safety,

use only original replacement parts

from the manufacturer or replacement

parts authorised by the manufacturer.

Electrical safety:

Caution: to avoid accidents and

injuries from electric shocks:

• Warning ! The plug and socket of an

extension cable must be water-tight!

Warning ! Unsuitable extension

cables can be dangerous as peo-

ple can be harmed by an electric

shock!

• Protect the electric plug connections

against moisture.

• If there is a risk of ooding, x the

plug connections in an area that is safe

from ooding.

• Ensure that the mains voltage matches

the specications on the rating plate.

• The electrical installation shall be ac-

cording to national wiring rules.

• The electric supply connection shall be

made by a qualied electrician and

comply with IEC 60364-1.

• It is recommended that the electric

supply to this machine should include

either a residual current device that

will interrupt the supply if the leakage

current to earth exceeds 30 mA for 30

ms or a device that will prove the earth

circuit.

• Before each use, check the equipment,

cable and plug for damage.

• If the power cable for this equipment is

damaged, it must be replaced by the

manufacturer, a customer service agent

of the same or a similarly qualied per-

son in order to prevent hazards.

• Warning ! Do not work with dam-

aged or incomplete equipment, or with

equipment that has been converted

without the approval of the manufac-

turer. Before initial operation, have a

specialist check that the required elec-

trical protection measures are in place.

• Warning ! Never operate the pres-

sure washer if the power supply cable

or other important parts, such as the

high-pressure hose or the gun, are

damaged.

• Protect the pressure washer from frost

and dry running.

• Use only original accessories and do

not carry out conversion work on the

equipment.

• Please read the notes in the operating

instructions on the topic of “mainte-

nance and cleaning”. Any measures

above and beyond these, particularly

opening the equipment, are to be car-

ried out by an electrician. In the case

of repairs, always contact our service

centre.

• Warning ! The washer was designed

for operation with a neutral detergent

based on a biologically decomposable

anionic tenside. Other detergents or

chemical substances could impair the

safety of the washer and damage it.

• If you come into contact with cleaning

agents, rinse with plenty of clean wa-

ter.

• Warning ! Water that has passed

through a backow preventer is classi-

ed as undrinkable.

• Warning ! High-pressure hoses, t-

tings and couplings are important for

machine safety. Use only high-pressure

hoses, ttings and couplings recom-

mended by the manufacturer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PHD 100 D2 - IAN 63638 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PHD 100 D2 - IAN 63638

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info