Bedienungsanleitung Parkside PHKSA 12 A1 - IAN 302329 (Seite 6 von 50) (Englisch)

679113

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

PHKSA 12 A1

│

3 ■

High-speed battery charger: PLG 12 A2

INPUT:

Rated voltage: 230–240 V

(AC), 50 Hz

Power consumption: 38 W

OUTPUT:

Rated voltage: 12.6 V

(DC)

Rated current: 2.4 A

Charging time: approx. 60 min

Fuse (internal): 2 A

T2A

Protection class: II / (double insulation)

Noise emission value:

Noise measurement value determined in accor-

dance with EN62841. The A-rated noise level of

the power tool is typically as follows:

Sound pressure level: L

= 83 dB(A)

Uncertainty K: K

= 3 dB

Sound power level: L

= 94 dB(A)

Uncertainty K: K

= 3 dB

Wear hearing protection!

Vibration emission value:

Total vibration values (vector total of three direc-

tions) determined in accordance with EN62841:

Sawing wood a

h,W

= 2.3 m/s

Uncertainty K = 1.5 m/s

NOTE

► The vibration emission value and noise

emission levels speciﬁed in these instructions

have been measured in accordance with the

standardised testing procedure speciﬁed and

can be used to make equipment compari-

sons. The speciﬁed vibration emission value

and the noise emission values can also be

used to make an initial load estimate.

WARNING!

► Depending on the manner in which the pow-

er tool is being used, and in particular the

kind of workpiece that is being worked, the

vibration and noise emission values can devi-

ate and may, in many cases, be higher than

the values given in these instructions. Regular

use of the power tool in this way may cause

the user to underestimate the vibration. Try to

keep the vibration loads as low as possible.

Measures to reduce the vibration load are,

e.g. wearing gloves and limiting the working

time. Wherein all states of operation must be

included (e.g. times when the power tool is

switched oﬀ and times where the power tool

is switched on but running without load).

General power tool

safety warnings

WARNING!

► Read all safety warnings, instructions, illust-

rations and speciﬁcations provided with this

power tool. Failure to follow all instructions

listed below may result in electric shock, ﬁre

and/or serious injury.

Save all warnings and instructions for future

reference.

The term „power tool“ in the warnings refers to

your mains-operated (corded) power tool or bat-

tery-operated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit. Cluttered

or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

ﬂammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or

fumes.

c) Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

IB_302329_PHKSA12A1_LB6-.indb 3 29.03.18 13:44

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PHKSA 12 A1 - IAN 302329 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PHKSA 12 A1 - IAN 302329

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info