Bedienungsanleitung Parkside PHKSA 20-Li A2 - IAN 302114 (Seite 26 von 117) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

722868

Zoom out

Zoom in

Vorherige Seite

1/117

Nächste Seite

PHKSA 20-Li A2

■ 22

│

Appliance-speciﬁc safety instructions

for circular saws

Safety instructions for all saws

Sawing method

a) DANGER! Keep your hands clear of

the sawing area and the saw blade.

Hold the auxiliary handle or motor

housing with your other hand. When both

hands are being used to hold the saw, neither

can be injured by the saw blade.

b) Do not reach underneath the workpiece. The

blade guard cannot protect you from the saw

blade below the workpiece.

c) Set the cutting depth to match the thickness

of the workpiece. Less than a full tooth height

should be visible below the workpiece.

d) Never hold the workpiece to be sawn in your

hand or over your leg. Fasten the workpiece

onto a stable working surface. It is important

to fasten the workpiece securely to minimise the

danger of bodily contact, jamming of the saw

blade or loss of control.

e) Hold the power tool only by the insulated

handles when you are carrying out work

during which the accessory tool may come

into contact with concealed power cables or

the tool’s own power cord. Contact with a live

wire will also make exposed metal parts of the

power tool live and could give the operator an

electric shock.

f) When making longitudinal cuts, always use

a rip fence or a straight edge guide. This will

improve the accuracy of your cut and reduce

the likelihood of the saw blade jamming.

g) Always use saw blades of the correct size

and with an appropriate central ﬁxing bore

(e.g. star-shaped or round). Blades that do not

match the mounting hardware of the saw will

run eccentrically, causing loss of control.

h) Never use damaged or incorrect blade wash-

ers or bolts. The blade washers and bolts were

specially designed for your saw, for optimum

performance and safety of operation.

Further safety instructions for all saws

Kickback - causes and corresponding safety

instructions

▯ A kickback is a sudden reaction caused as a

result of the saw blade catching, jamming or

being falsely aligned, causing the saw to jump

up uncontrollably and out of the workpiece in

the direction of the operator;

▯ if the saw blade catches or jams in a narrowing

saw cut, the blade can no longer rotate and the

power of the motor throws the appliance back

in the direction of the operator;

▯ if the saw blade twists in the saw cut or be-

comes misaligned, the teeth at the rear edge of

the saw blade can become caught in the wood

surface, causing the saw blade to jump out of

the cut and the saw to jump backwards in the

direction of the operator.

Kickback is a result of saw misuse and/or incorrect

operating procedures or conditions. This can be

avoided by taking proper precautions as described

below.

a) Hold the saw ﬁrmly in both hands and posi-

tion your arms such that they can absorb the

force of a kickback. Always stand to the side

of the saw blade and never in line with it. If

a kickback occurs, the circular saw may jump

backwards. However, by taking appropriate

precautions the operator can control the kick-

back forces.

b) If the saw blade jams or you stop working,

switch the saw oﬀ and hold it steadily in the

workpiece until the saw blade has completely

stopped turning. Never attempt to remove

the saw from the workpiece or pull it back-

wards while the saw blade is still moving as

this could lead to a kickback. Investigate and

take corrective actions to eliminate the cause of

blade binding.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PHKSA 20-Li A2 - IAN 302114 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info