764033
7
Zoom out
Zoom in
Vorherige Seite
1/42
Nächste Seite
7
IE NI
The device has an automatic
switch-off when the device is not
in use. It switches off automatically
after 30 minutes.
Operating temperature
indicator
After switching on the device, it heats up.
The transparent On/off switch (1) lights up:
On/off switch (1) lit up red
= device heating up
On/off switch (1) lit up green
= operating temperature reached
(approx. 140°C)
The device takes approx. 60 se-
conds to heat up before it reaches
the operating temperature.
Working with the device
Preparing the bonding surfaces
Do not use any ammable
solvents to clean the bonding
surfaces.
Clean the bonding surfaces! They must
be clean, dry and free of grease.
Roughen smooth surfaces before glu-
ing.
Warm quick-cooling materials such as
steel up a bit before gluing. The glue
will stick better.
The ambient temperature and the ma-
terials to be glued must not be colder
than + 5°C or warmer than + 50°C.
Removing/inserting the re-
chargeable battery
1. To remove the rechargeable battery
(4) from the device, press the release
button (5) on the battery and pull the
battery out.
2. To insert the battery (4), push the battery
along the guide rail into the device. You
will hear it click into place.
Switching on and off
Switching the device on::
Hold down the transparent On/off switch
(1) for 3 seconds.
The LED work light (6) now lights up per-
manently.
Switching off the LED work light:
The device is switched on, the LED work
light lights up permanently. To switch off
the LED work light, now press and hold the
transparent On/off switch for several secon-
ds. The LED work light switches off, but the
device continues running.
To only switch off the LED work
light, make sure to press and hold
the On/off switch for several se-
conds. Pressing for too short of a
time switches off the entire device.
Switching the device off:
Press the transparent On/Off switch (1).
Place the cordless hot glue
gun on the inserted batte-
ry until the device is cooled
down completely. The hot
nozzle can cause damage
and/or burns.
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside PHPA 20-Li A1 - IAN 354648 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info