Bedienungsanleitung Parkside PHS 450 A1 - IAN 436117 (Seite 25 von 186) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch)

819956

Zoom out

Zoom in

Vorherige Seite

1/186

Nächste Seite

power tool may result in personal in-

jury.

e) Do not overreach. Keep prop-

er footing and balance at all

times. This enables better control

of the power tool in unexpected situ-

ations.

f) Dress properly. Do not wear

loose clothing or jewellery.

Keep your hair and clothing

away from moving parts. Loose

clothes, jewellery or long hair can be

caught in moving parts.

g) If devices are provided for the

connection of dust extraction

and collection facilities, ensure

these are connected and prop-

erly used. Use of dust collection can

reduce dust-related hazards.

h) Do not let familiarity gained

from frequent use of tools al-

low you to become complacent

and ignore tool safety prin-

ciples. A careless action can cause

severe injury within a fraction of a

second.

4. POWER TOOL USE AND CARE

a) Do not force the power tool.

Use the correct power tool for

your application. The correct

power tool will do the job better and

safer at the rate for which it was de-

signed.

b) Do not use the power tool if the

switch does not turn it on and

off. Any power tool that cannot be

controlled with the switch is dangerous

and must be repaired.

c) Disconnect the plug from the

power source and/or remove

the battery pack, if detach-

able, from the power tool be-

fore making any adjustments,

changing accessories, or stor-

ing power tools. Such preventive

safety measures reduce the risk of start-

ing the power tool accidentally.

d) Store idle power tools out of

the reach of children and do

not allow persons unfamiliar

with the power tool or these in-

structions to operate the power

tool. Power tools are dangerous in

the hands of untrained users.

e) Maintain power tools and ac-

cessories. Check for misalign-

ment or binding of moving

parts, breakage of parts and

any other condition that may

affect the power tool’s oper-

ation. If damaged, have the

power tool repaired before

use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and

clean. Properly maintained cutting

tools with sharp cutting edges are less

likely to bind and are easier to control.

g) Use the power tool, accessories

and tool bits etc. in accordance

with these instructions, taking

into account the working con-

ditions and the work to be per-

formed. Use of the power tool for

operations different from those inten-

ded could result in a hazardous situ-

ation.

h) Keep handles and grasping

surfaces dry, clean and free

from oil and grease. Slippery

handles and grasping surfaces do not

allow for safe handling and control of

the tool in unexpected situations.

5. SERVICE

a) Have your power tool serviced

by a qualified repair person us-

ing only identical replacement

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PHS 450 A1 - IAN 436117 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info