Bedienungsanleitung Parkside PHSHE 900 B2 - IAN 313266 (Seite 21 von 106) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

733445

Zoom out

Zoom in

Vorherige Seite

1/106

Nächste Seite

│

17 ■

PHSHE 900 B2

Package contents

1 motor unit PHSHE 900 B2

1 hedge trimmer attachment PHS 1 (hereinafter hedge trimmer)

1 pole pruner attachment PHE 1 (hereinafter pole pruner)

Accessories

shoulder strap

chain guard

blade guard

100 ml organic chain oil

assembly tool

1 set of operating instructions

Technical data

Motor unit: PHSHE 900 B2

Rated voltage: 230 V ∼ 50 Hz (AC)

Rated output: 900W

Protection class: II /

(double insulation)

Weight:

(without handle &

carrying strap): approx. 2.7 kg

Pole pruner: PHE 1

Chain speed: max. 6 m/s

Working angle:

0°; 15°; 30°

Weight (ready for use): approx. 1.6 kg

Oil tank, recommended ﬁll level: 100 ml

Cut length: approx. 260 mm

Blade: Oregon type 100SDEA041

Saw chain: Oregon 91P040X

Hedge trimmer: PHS 1

Idle stroke speed: 2000 rpm

Working angle:

-90° to +90°

Cut length: 410 mm

Tooth spacing: 20 mm

Weight

(ready for use): approx. 2.1 kg

Noise and vibration information:

Measured sound value determined according to EN 60745. The A-rated

noise levels of the electrical power tool are tyoically at:

Pole pruner: PHE 1

Sound pressure level: L

= 83 dB (A)

Uncertainty K: 3 dB

Sound power level: L

= 104 dB (A)

Uncertainty K: 3 dB

Hedge trimmer: PHS 1

Sound pressure level: L

= 81 dB (A)

Uncertainty K: 3 dB

Sound power level: L

= 102 dB (A)

Guaranteed sound power level: L

= 105 dB (A)

Uncertainty K: 3 dB

Vibration values (vector total of three directions) determined in accordance

with EN 60745:

Pole pruner:

Vibration on the front handle: Vibration emission value

h,D

= 1.0 m/s

Uncertainty K = 1.5 m/s

Vibration on the rear handle: vibration emission value

h,D

= 1.2 m/s

Uncertainty K = 1.5 m/s

Hedge trimmer:

Vibration on the front handle: Vibration emission value

h,D

= 1.6 m/s

Uncertainty K = 1.5 m/s

Vibration on the rear handle: Vibration emission value

h,D

= 1.8 m/s

Uncertainty K = 1.5 m/s

Wear ear protection!

NOTE

► The vibration level speciﬁed in these instructions has been measured

in accordance with the standardised measuring procedure speciﬁed

in EN 60745 and can be used to make equipment comparisons. The

speciﬁed vibration emission value can also be used to make an initial

exposure estimate.

WARNING!

► The vibration level will vary according to the use of the power tool

and may sometimes be higher than the value speciﬁed in these

instructions. Regular use of the power tool in such a way may cause

the user to underestimate the vibration. Try to keep the vibration

exposure as low as possible. Measures to reduce the vibration

exposure are, for example, wearing gloves and limiting the working

time. All states of operation must be considered (e.g. times when the

power tool is switched oﬀ and times where the power tool is switched

on but running without load).

Explanation of the symbols on the appliance:

Read the operating instructions and safety

advice before initial operation!

Wear protective gloves!

Wear safety shoes!

Wear ear protection!

Wear a hard hat!

Wear protective goggles!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PHSHE 900 B2 - IAN 313266 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info