Bedienungsanleitung Parkside PHSHE 900 B2 - IAN 313266 (Seite 28 von 106) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

733445

Zoom out

Zoom in

Vorherige Seite

1/106

Nächste Seite

■ 24

│

PHSHE 900 B2

♦ Sawing oﬀ larger branches

♦ When sawing larger branches (Ø 8–25 cm), ﬁrst make a relief cut

(see ﬁgure).

■ A relief cut also prevents peeling of the bark on the main trunk.

♦ Saw from the top

to the bottom

Saw in sections

Long or thick branches should be shortened before making the ﬁnal cut

(see ﬁgure).

cb a

Working safely

■ Keep the appliance, the cutting mechanism and the blade guard in

good condition to prevent injury.

■ If the appliance has been dropped, check for signiﬁcant damage or

defects.

■ Maintain the speciﬁed angle 60°±10° to ensure safe operation (see

ﬁgure).

■ Do not use the appliance while standing on a ladder or with unsteady

footing.

■ Do not be tempted into making a poorly considered cut. You could

endanger yourself and others.

■ Children should be supervised to ensure that they do not play with the

appliance.

■ Change your working position regularly. Using the appliance for a long

time can lead to vibration-related circulation disorders of the hands.

You can extend the usage duration by using appropriate gloves or by

taking regular breaks. Note that any personal predisposition to poor

blood circulation, low external temperatures or large gripping forces

can reduce the usage period.

■ You can reduce the vibration risk, for example, the risk of Raynaud’s

phenomenon, by taking regular breaks during which you rub your

hands together.

Transport

■ Use the protective cases

for transporting the appliance.

■ Ensure that the appliance cannot switch on during transport (see

ﬁgure).

Maintenance and cleaning

WARNING! If the mains cable needs to be replaced,

this must be carried out by the manufacturer or an

authorised representative in order to avoid safety

hazards.

■ The motor unit must always be kept clean, dry and free from oil or

grease.

■ The pole pruner must be cleaned of sawdust at regular intervals.

♦ Use a soft, dry cloth to clean the housing.

♦ Remove the sprocket cover

♦ Remove the saw chain

from the blade and clean the guide

rail

♦ Keep the saw chain

sharp and check the tension; check the oil level

and the oil supply.

♦ Check the hedge trimmer for loose screws on the cutter bar

and

tighten these if necessary.

♦ Remove stuck cuttings.

♦ Maintain the cutter bar

using an oil spray or an oil can.

Storage

■ Always clean the appliance thoroughly before storing.

■ Store the appliance in the supplied protective cases in a dry

place and out of the reach of children.

■ Store the appliance horizontally or secured against falling.

■ Empty the oil tank

. Organic chain oil can resinify or leak through

the vent hole in the oil ﬁller cap .

C A B

max. 60°±10°

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PHSHE 900 B2 - IAN 313266 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info