Bedienungsanleitung Parkside PHSL 710 A1 - IAN 415845 (Seite 26 von 316) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch)

819957

Zoom out

Zoom in

Vorherige Seite

1/316

Nächste Seite

GB MT

Function Description

The electric hedge trimmer is driven by an

electronic motor. The equipment is double-

insulated for safety and does not require

earthing.

The hedge trimmer is equipped with a dou-

ble-sided safety cutter bar. When cutting,

the blades move backwards and forwards

in linear motion.

The unit can only be operated with the

safety switch depressed, in order to protect

the operator. In addition, the hand guard

protects against branches and briars.

Please note the following descriptions for

the function of the operating components.

Technical Data

Long-Reach

Hedge Trimmer..................... PHSL 710 A1

Input voltage rating ....230-240 V~/50 Hz

Input power ................................ 710 W

Idle speed n0 ......................... 1000 min-1

Safety class ..................................... II

Degree of protection ....................... IPX0

Weight

(incl. accessories) ..........approx. 4.3 kg

Cutting length ............................ 410 mm

Max. recommended

branch thickness ...................... 15 mm

Acoustic pressure level

(LpA) .......................88.4 dB; KpA= 3 dB

Sound power level (LWA)

measured ..........99.4 dB, KWA= 1.99 dB

guaranteed .............................101 dB

Vibration (ah) at the

handle ............ 3.33 m/s2; K= 1.5 m/s2

round handle ...3.41 m/s2; K= 1.5 m/s2

Noise and vibration values have been de-

termined according to the standards and

regulations mentioned in the declaration of

conformity.

The specied total vibration value and the

specied noise emission value can also be

used for a preliminary assessment of the load.

Warning: The vibration and noise emis-

sions during actual use of the power tool

may differ from the indicated values, de-

pending on the way in which the power

tool is used, in particular what type of

workpiece is being machined.

It is necessary to establish safety measures

to protect the operator based on an esti-

mation of the vibration exposure during ac-

tual conditions of use (taking into account

all parts of the operating cycle, such as

periods when the power tool is switched

off and those when it is switched on but

running without load).

Notes on Safety

This section deals with the basic safety

regulations to be observed when working

with the electric hedge trimmer.

Symbols in the manual

Warning symbols with in-

formation on damage and

injury prevention.

Hazard symbol with infor-

mation on the prevention of

personal injury caused by

electric shock.

Instruction symbols with information

on preventing damage.

Always remove the mains plug be-

fore working on the appliance.

Help symbols with information on

improving tool handling.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PHSL 710 A1 - IAN 415845 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info