785729
13
Zoom out
Zoom in
Vorherige Seite
1/67
Nächste Seite
PKA 20-Li A1 GBIENI 9
Switching on and off
Switching on the appliance (air pump)
Set the ON/OFF switch to the position
.
Switching on the appliance (compressor)
Set the ON/OFF switch to the position .
The appliance starts as soon as you switch on
the display (see section “Display”).
NOTE
The compressor will not work if the display
is switched off.
Switching off the appliance
Set the ON/OFF switch to the position .
Display
Press the ON/OFF button to switch on
the display .
After two seconds, the current pressure of the
connected item is shown.
NOTE
If the compressed air hose is not connected
to a suitable item, the display indicator
shows "0".
You can switch between “bar”, “psi” and “kpa”
on the display by pressing the ON/OFF
button .
NOTE
The display (and also the compressor)
switches off after around three minutes of
inactivity.
The compressor will not work if the display
is switched off.
The compressor switches off automatically
when the preset pressure has been reached.
Press and hold the ON/OFF button for
5 seconds to turn off the display .
Setting the pressure
Press the “+” button or the “−” button to
set the desired pressure.
TIP
When you press and hold the "+" button
or the "-" button for a little longer, the
pressure setting changes quickly.
Use
Inflation with blower hose
Remove the valve cap of the item you want
to inflate.
Remove the blower hose from the storage
compartment .
Fit the connection of the blower hose onto
the air outlet . Screw it in tight by turning it
clockwise.
Fit the appropriate adapter or onto
the blower hose .
Push the adapter or into the valve of
the item.
Switch the appliance on by moving the
ON/OFF switch to the position .
Once the desired level of inflation has been
reached, switch off the appliance by moving
the ON/OFF switch to the position .
Now remove the adapter or .
Replace the valve cap on the item that you
have inflated.
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside PKA 20-Li A1 - IAN 363935 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info