Bedienungsanleitung Parkside PKGA 20-Li A1 - IAN 285393 (Seite 33 von 164) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

722871

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

GB IE

Additional safety instructions

Warning! Sawing or sanding

can result in the formation of

hazardous dusts (e.g. arising

from materials with paints

containing lead, materials

containing asbestos, metals or

some wood types) which can

present a hazard to the opera-

tor or persons in the vicinity.

Make sure that the workplace

is well ventilated. Always

wear safety goggles, safety

gloves and respiratory protec-

tion. Attach a dust extraction

system.

1) SPECIAL SAFETY INFORMATION

FOR THE CORDLESS COMBINATION

TOOL

• Use the additional handles deliv-

ered with the appliance. The loss of

control can result in injuries.

• Hold the electric tool by the insu-

lated handle surfaces when per-

forming work where the cutting

tool or screw may come into con-

tact with hidden wiring. Contact

with a live wire can also cause a charge

in metal parts of the appliance and result

in an electric shock.

• Use suitable detectors in order to



the local utility company. Contact

with electrical cables can lead to electric





a water pipe can lead to property dam-

aged and electric shock.

• Secure the workpiece. A workpiece

that is retained with clamping appliances

or a vice is held more securely than with

your hand.

• Be very careful when handling

tools such as saws, scraper

blades and drills. These are sharp

and present an injury hazard.

• Wear safety gloves when chang-

ing attachments. This enables you

to avoid injuries if the appliance attach-

ment has heated up after use.

2) SPECIFIC SAFETY INSTRUCTIONS

WHEN SAWING

• Keep hands away from the saw-

ing area. Do not reach under-

neath the workpiece. Always

stand to the side of the saw

when working. Upon contact with

the blade there is a risk of injury.

• Only when the electric tool is

turned on should the sawing

blade be moved against the

workpiece. There is a risk of kickback

if the tool insert jams in the workpiece.

• Make sure that the footplate

is securely placed against the

workpiece during sawing. The

sawblade can tilt and lead to loss of con-

trol over the power tool.

•



turn the power tool off and do not

pull the sawblade out of the cut

until it has come to a standstill. In

this way you will avoid any kickback and

can safely put down the power tool.

• Use only undamaged sawblades

in perfect condition. Bent or blunt

blades can break, adversely affect the

cut or cause kickback.

• Do not brake the sawblade after

switching the appliance off by

applying side pressure. The saw-

blade may be damaged, break or cause

a kickback.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PKGA 20-Li A1 - IAN 285393 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info