Bedienungsanleitung Parkside PKZ 180 A1 - IAN 93472 (Seite 31 von 34) (Französisch)

668303

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

31 GB

... / Cleaning / Care / Spare ... / Maintenance and ... /Information about ...

General safety information for electrical devices / Before use / Start-up

Using the adapter set

The adapter set allows the tyre ﬁlling device to be

used for the following additional applications:

a) Inﬂating balls using the ball needle

b) The valve adapter

allows bicycle tyres to be

inﬂated.

c) Inﬂating pools, air mattresses or dinghies using

the additional adapter

d) inﬂating items with screw valves (e.g. dinghies)

using the screw-on valve adapter

e) Deﬂating large-volume items. Use the deﬂating

valve adapter

for this purpose.

f) The two tapered universal adapters (

)

can also be used to inﬂate air mattresses.

Cleaning / Care

Note: We recommend cleaning the device imme-

diately after every use. Please ﬁrst unplug from the

mains before cleaning.

Be sure the device is completely cooled oﬀ to

prevent burns.

Do not use cleaning agents or solvents for

cleaning.

Be sure water does not enter the device.

Depressurise the device before cleaning. To do

so, use the tyre ﬁlling device as a blow-out gun

and activate the trigger until no air escapes

anymore.

Note: Store the compressor in a dry and safe

environment. Bleed the device and any connected

air tools before storing.

Spare parts

Please contact our Service Department directly if

you are in need of spare parts.

www.cmc-creative.de

E-mail:

service.gb@cmc-creative.de

Phone: +49 (0) 6894 9989752

Maintenance and Service

This device requires no maintenance.

Note: Never open the device. Any repairs must

be performed by our authorised service branch or

Customer Service.

Please note the following, if one of the errors below

occurs:

Disconnect the device from any power supply.

Allow the device to cool down and wait a

short period to neutralise residual energy.

Always verify the device is in safe working

condition.

Fault analysis

Fault Solution

1. Compressor

doesn't start

1. Check the mains supply.

Check all cables, the fuse

and outlet are working.

2. Do not use extension ca-

bles which are too long.

3. Do not use the device in

ambient temperatures

below + 5 °C.

4. Avoid the motor overheat-

ing. Allow the motor to cool

down.

2. Insuﬃcient

working pres-

sure

Check seals and the check

valve and have replaced, if

necessary

3. Tools aren't

working

Check hoses, quick-discon-

nect coupling and tools, and

have replaced if necessary

Information about warranty

and service processing

Creative Marketing Consulting GmbH

warranty

Dear customer, the warranty for this device is 3 years

from the date of purchase. In the event of product

defects, you have legal rights against the retailer of

this product. Your statutory rights are not limited in

any way by our warranty detailed below.

93472_Kompressor_PKZ_180_A1_content_LB2.indd 31 27.11.13 15:52

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PKZ 180 A1 - IAN 93472 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PKZ 180 A1 - IAN 93472

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info