Bedienungsanleitung Parkside PMFW 280 A2 - IAN 93266 Multi-Purpose Tool (Seite 9 von 60) (Französisch, Schwedisch)

634195

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

9 GB/IE

General safety advice for electrical power tools General safety advice for electrical power tools / Assembly

Safety advice relating speciﬁ-

cally to this multifunction tool

When working, hold the electrical

power tool firmly with both hands and

keep a proper footing and balance. It

is safer to guide the electrical power tool using

both hands.

Secure the workpiece. A workpiece held

in a clamp or vice is kept more securely in

place than one held by your hand.

Keep your working area clean. Mixtures

of materials can be particularly dangerous.

Light metal alloy dust may burn or explode.

Do not operate the device if the mains

lead or mains plug is damaged.

Do not touch the mains lead if it be-

comes damaged or cut through while

you are using the device. Pull the plug

out of the mains socket immediately and have

the device repaired by a suitably qualiﬁed per-

son or at your service centre. Damaged mains

leads increase the risk of electric shock.

Wear protective gloves when replacing

a tool in the device. Tools heat up with

prolonged use.

Use the electrical power tool only for

dry abrading / sawing / cutting.

Do not operate the device if it is damp

and do not use it in a damp environ-

ment. Water entering an electrical device in-

creases the risk of electric shock.

Keep your hands away from the area

of the saw blade. Do not grip the underside

of the workpiece. Contact with the saw blade

may result in injury.

Use a suitable detector to locate con-

cealed services supply cables / pipes

or approach your local public utilities

services providers. Contact with electricity

cables can lead to ﬁre or electric shock.

Damaging a gas pipe can lead to an explo-

sion. Penetration of a water pipe can lead to

property damage or to electric shock.

If you use the device outdoors, always

connect it through a residual current

device (RCD) with a maximum trip cur-

rent of 30 mA. If using an extension lead, al-

ways use one that is approved for outdoor use.

Any harmful / noxious dusts

generated from sanding represent a risk to the

health of the person operating the device and

to anyone near the work area.

Wear safety glasses and a dust pro-

tection mask!

Ensure that there is adequate ventila-

tion when working on plastic, paint,

varnish etc.

Do not soak the materials or the sur-

face you are about to work on with

liquids containing solvents.

Advice on use

Principle of operation:

The oscillating drive causes the attached tool to vi-

brate backwards and forwards up to 21000 times

per minute. This means the tool can produce precise

work in the tightest of spaces.

Sawing / cutting:

Use only undamaged, defect-free saw blades.

Distorted, blunt or otherwise damaged saw

blades could break.

When sawing lightweight building materials,

observe the statutory requirements and the

manufacturer’s recommendations.

Use the device in plunge sawing mode on soft

materials such as wood, gypsum plaster board

etc. only!

Sanding:

Ensure that you use even contact pressure. This

will increase sanding sheet life.

Assembly

Vacuum extraction of

dust / debris

Do not use the tool on materials containing asbestos.

Asbestos is a known carcinogen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PMFW 280 A2 - IAN 93266 Multi-Purpose Tool Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PMFW 280 A2 - IAN 93266 Multi-Purpose Tool

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info