Bedienungsanleitung Parkside PMRA 20-Li B2 - IAN 462730 Robot (Seite 53 von 388) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch)

819505

Zoom out

Zoom in

Vorherige Seite

1/388

Nächste Seite

GB MT

7. Conrm the selection with the OK but-

ton (7).

8. Select the desired operating time with

the arrow buttons.

You set the operating time in full

hours per day.

9 Conrm the selection with the OK but-

ton (7).

10. Return to the main menu with the back

button (5).

When the set operating time per

day is reached, the lawn mower au-

tomatically returns to the charging station.

An extension of the operating time during

rain breaks can be set directly via the lawn

mower, see section “Setting the rain sen-

sor” or via the Parkside App: Settings

> Rain Sensor.

Setting secondary areas

In highly angular gardens, the area output

can be improved,

by setting secondary starting points. In this

case, several starting points can be select-

ed on the perimeter wire.

This allows the robotic mower to reach

areas of your garden that are difcult to

access.

The robotic mower will travel the selected

distance along the boundary wire and start

mowing in this area.

You can freely choose 5 further starting

points. To do this, measure the distance be-

tween the charging station and the starting

point clockwise along the perimeter wire.

You use the frequency in percent to deter-

mine how often the robotic mower starts its

work from the charging station or from the

respective starting points. The mowing pro-

cedure is still chaotic in this mode.

The secondary starting points are automat-

ically approached during operating hours

and according to schedule.

1. If necessary, open the cover (1).

2. Unlock the display (10) with the 4-digit

PIN.

3. Press the OK button (7) to enter the

main menu.

4. Use the arrow buttons (6) to select

“Secondary areas”.

5. Press the OK button to select a second-

ary range (Areas). Select the starting

distance “Distance (dst)m” and the

ratio “Percent (pct)%” of the area to be

mowed with the arrow buttons (6) and

press the OK button to conrm. After

the selection, you automatically return

to the overview of the secondary areas.

6. Repeat step 5 to complete the setting of

each secondary area (Areas).

7. Press the OK button (7) to conrm the

result of the setting.

The lawn mower travels the distance

“Distance (dst) m” specied by you

along the boundary wire (1 - 500 metres)

and then starts mowing.

You can specify the frequency under

“Percent (pct)%” to determine how

often the robotic mower starts its work from

the charging station or from the respective

starting points.

The sum of the “Percent (pct)%” indication

of the 5 secondary ranges (Areas) must be

less than/equal to 100 %.

Spot mode / xed point

mowing

This function allows you to mow lawns that

are otherwise covered by seating furniture,

playground equipment or similar.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PMRA 20-Li B2 - IAN 462730 Robot Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info