762980
25
Zoom out
Zoom in
Vorherige Seite
1/253
Nächste Seite
25GB/IE/NI/CY/MT
Z
Overlap welds
The most common preparation is that
with the straight weld edges. The weld
can be released using a standard angle
weld seam. Both workpieces must be
brought as close to each other as possi-
ble, as shown in Fig. AB.
AB
MMA welding
Make sure that the main switch
5
is set to position “O” (“OFF”) or that
the power plug
3
is not plugged
into the socket.
Connect the electrode holder
34
and
the earth terminal
4
to the welding
device, as shown in Fig. AC). Also
refer to the information from the
electrode manufacturer.
Put on appropriate protective cloth-
ing in accordance with the specifi ca-
tions and prepare your workspace.
Connect the earth terminal
4
to the
workpiece.
Clamp the electrode into the elec-
trode holder
34
.
Switch the device on by setting the
main switch to the
5
“I” (“ON”)
position.
Select “MMA” mode by pressing the
selector switch for welding mode
35
,
until the small indicator lamp next to
MMA lights up.
Adjust the welding current using the
rotary switch for welding current
adjustment
6
depending on the
electrode you are using.
AC
34 4
35
36
6
Note: Guideline values for the welding
current to be used, depending on the
electrode diameter can be taken from
the following table.
Ø Electrode Welding current
1.6 mm 40–55 A
2.0 mm 55–65 A
2.5 mm 65–80 A
3.2 mm 80–120 A
Note: By pressing the voltage reducer
selector key
37
you can activate the
voltage reducer function (VRD). The LED
next to A/VRD” lights up. By doing this
the output voltage is reduced and the
safety for the user during breaks from
welding will be increased.
Using the device / MMA welding
25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

parkside-pmsg-200-a1---ian-337263

Suche zurücksetzen

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside PMSG 200 A1 - IAN 337263 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info