Bedienungsanleitung Parkside PMTS 210 A1 - IAN 367465 (Seite 19 von 152) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Spanisch, Polnisch)

779278

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

13GB/IE

Service information

With this product, it is necessary to note that the following parts

are subject to natural or usage-related wear, or that the follow-

ing parts are required as consumables.

Wearing parts*: carbon brushes, table inlay, push stick, saw

blade

* may not be included in the scope of supply!

14. Storage

Store the device and its accessories in a dark, dry and frost-

free place that is inaccessible to children. The optimum storage

temperature is between 5 and 30˚C.

Store the power tool in its original packaging.

Cover the power tool to protect it from dust or moisture.

Store the operating manual with the power tool.

15. Electrical connection

The electrical motor installed is connected and

ready for operation. The connection complies with

the applicable VDE and DIN provisions. The cus-

tomer’s mains connection as well as the extension

cable used must also comply with these regula-

tions.

Important information

In the event of overloading, the motor will switch itself oﬀ. After

a cool-down period (time varies) the motor can be switched

back on again.

Damaged electrical connection cable

The insulation on electrical connection cables is often dam-

aged.

This may have the following causes:

• Pressure points, where connection cables are passed through

windows or doors.

• Kinks where the connection cable has been improperly fas-

tened or routed.

• Places where the connection cables have been cut due to

being driven over.

• Insulation damage due to being ripped out of the wall outlet.

• Cracks due to the insulation ageing.

Such damaged electrical connection cables must not be used

and are life-threatening due to the insulation damage.

Check the electrical connection cables for damage regularly.

Ensure that the connection cables are disconnected from elec-

trical power when checking for damage.

Electrical connection cables must comply with the applicable

VDE and DIN provisions. Only use connection cables with des-

ignation “H05VV-F”.

The printing of the type designation on the connection cable

is mandatory.

If it is necessary to replace the connection cable, this must

be done by the manufacturer or their representative to avoid

safety hazards.

AC motor

• The mains voltage must be 220-240 V∼.

• Extension cables up to 25 m long must have a cross-section

of 1.5 mm2.

Connections and repair work on the electrical equipment may

only be carried out by electricians.

Please provide the following information in the event of any

enquiries:

• Type of current for the motor

• Machine data - type plate

16. Disposal and recycling

The device is supplied in packaging to avoid transport dam-

ages. This packaging is raw material and can thus be used

again or can be reintegrated into the raw material cycle.

The device and its accessories are made of diﬀerent materials,

such as metal and plastic. Take defective components to spe-

cial waste disposal sites. Check with your specialist dealer or

municipal administration!

The packaging is wholly composed of environmen-

tally-friendly materials that can be disposed of at

a local recycling centre.

Contact your local refuse disposal authority for

more details of how to dispose of your worn-out

electrical devices.

Old devices must not be disposed of with house-

hold waste!

This symbol indicates that this product must not be dis-

posed of together with domestic waste in compliance

with the Directive (2012/19/EU) pertaining to waste

electrical and electronic equipment (WEEE). This prod-

uct must be handed over at the intended collection point. This

can be done, for example, by returning it when purchasing a

similar product or delivering it to an authorised collection point

for the recycling of old electrical and electronic devices. Im-

proper handling of waste equipment may have negative conse-

quences for the environment and human health due to poten-

tially hazardous substances that are often contained in

electrical and electronic equipment. By properly disposing of

this product, you are also contributing to the eﬀective use of

natural resources. You can obtain information on collection

points for waste equipment from your municipal administration,

public waste disposal authority, an authorised body for the dis-

posal of waste electrical and electronic equipment or your

waste disposal company.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PMTS 210 A1 - IAN 367465 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info