Bedienungsanleitung Parkside PNTS 1400 D1 - IAN 100131 (Seite 7 von 64) (Deutsch, Englisch, Holländisch, Schwedisch, Finnisch)

595399

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

IEGB

General notes on safety

Caution! When using electrical ma-

chines, observe the following basic

safety measures for the prevention

of electric shocks and the risk of

injury and re:

To avoid accidents and injuries:

• Never leave a machine which is ready

for operation unattended at the work-

place.

• People and animals must not be vacu-

umed with the machine.

• Do not aim the suction hose and noz-

zle at yourself or others during use,

particularly not at the eyes and ears;

there is a risk of injury.

• Do not vacuum any hot, incandescent,

ammable, explosive materials, or

those which endanger health. This in-

cludes hot ashes, petrol, solvents, acids

or caustic solutions. Personal injury

could occur.

• Nozzles and suction tubes must not

reach head level whilst in use. Personal

injury could occur.

To avoid accidents and injuries

from electric shocks:

• Ensure that the mains cable is not

damaged by being pulled over sharp

edges, by jamming, or by pulling on

the cable.

• Before each use, check the power sup-

ply lead and the extension cable for

damage and ageing. Do not use the

equipment if the cable is damaged or

worn. Danger of electric shock hazard.

• If the power cable for this equipment is

damaged, it must be replaced by the

manufacturer, a customer service agent

of the same or a similarly qualied per-

son in order to prevent hazards.

• Switch the machine off and pull the

plug under the following circumstances:

- when you are not using the device,

- transporting it or leaving it unat-

tended;

- when you are checking the device,

cleaning it or removing blockages;

- when you are carrying out cleaning

or maintenance work or replacing

accessories;

- when the power or extension cable

is damaged; after contact with for-

eign bodies or in case of abnormal

vibration.

• Never use the mains lead to pull the

plug out of the socket or to pull the

appliance. Protect the mains lead from

heat, oil and sharp edges.

• Make sure that the mains voltage cor-

responds with the information on the

rating plate.

• Only plug the appliance into a socket

which is safeguarded by at least 16A.

• The device must only be connected to

a mains socket via a residual-current

circuit breaker (RCD) with a rated leak-

age current of not more than 30mA.

The following states how damage

to the appliance and possible in-

jury to people can be avoided:

• Ensure that the machine is correctly

assembled and the lters are in the cor-

rect position.

• Do not use without the lter. This could

damage the machine.

• Only use Spare parts and accessories

delivered and recommended by our

Service Centre (see “Spare parts/Ac-

cessories”). The use of parts by other

manufacturers immediately renders the

guarantee void.

• Only have repairs carried out at our

authorised customer service points.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PNTS 1400 D1 - IAN 100131 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info