Bedienungsanleitung Parkside POF 1200 A1 - IAN 100129 (Seite 12 von 55) (Deutsch, Englisch, Holländisch, Schwedisch, Finnisch)

576627

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

12 GB

… / Disposal / Translation of the original declaration of conformity / ManufacturerOperation / Maintenance and Cleaning / Warranty

Milling with the copy casing

Note! The pattern must be at least as high as the

copy casing’s

thrust ring

Note! Chose the router bit as small as the inner

diameter of the copy casing.

When using a copy casing

the pattern can be

transferred onto the work piece.

Place the router with the copy casing on the

pattern.

Loosen the clamping lever

by turning it clock-

wise and lower the device until it reaches pre-

determined depth.

Lead the device with the protecting copy casing

along the pattern. Apply pressure lightly.

Milling with a rip fence

Push the rip fence

along the guide rail

the base plate

and tighten the screws

Put the rip fence

on the edge of the work

piece (see ﬁg. F, H).

Milling with a circular

compass (see ﬁg. J)

Put the centring pin

in the marked mid point

of the circle.

Turn the rip fence

over, i.e.the fence side is

facing upwards.

Screw together the centre pin and the rip fence

with a wing bolt. Lock the centre pin to the s

crews

with the slot of the open-ended spanner

Maintenance and Cleaning

RISK OF INJURY! Switch the

device oﬀ and pull the plug out of the mains socket

before carrying out any work on the device.

Always keep the device clean, dry and free of

oil or grease.

Use a dry cloth to clean the housing.

If the connection cable needs

to be replaced, this repair must be performed

by the manufacturer or a representative to pre-

vent safety hazards.

Note: Spare parts not listed (e.g. carbon brushes,

switches) can be ordered through our call centre.

Warranty

The warranty for this appliance is for 3

years from the date of purchase. The ap-

pliance has been manufactured with care

and meticulously examined before deliv-

ery. Please retain your receipt as proof

of purchase. In the event of a warranty

claim, please make contact by telephone

with our Service Department. Only in this

way can a post-free despatch for your

goods be assured.

The warranty covers only claims for material and

maufacturing defects, but not for transport damage,

for wearing parts or for damage to fragile compo-

nents, e.g. buttons or batteries. This product is for pri-

vate use only and is not intended for commercial use.

The warranty is void in the case of abusive and im-

proper handling, use of force and internal tampering

not carried out by our authorized service branch. Your

statutory rights are not restricted in any way by this

warranty.

The warranty period will not be extended by repairs

made unter warranty. This applies also to replaced

and repaired parts. Any damage and defects extant

on purchase must be reported immediately after

unpacking the appliance, at the latest, two days after

the purchase date. Repairs made after the expiration

of the warranty period are subject to payment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside POF 1200 A1 - IAN 100129 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info