796059
48
Zoom out
Zoom in
Vorherige Seite
1/236
Nächste Seite
48
GB IE
head a few times on the ground. This
causes the thread to lengthen.
2. The line cutter (26) inserted into the
protective cover (7) cuts the line to the
desired length.
If the line ends cannot
be lengthened:
Turn off the device.
Press the spool insert as far as it will go
and pull rmly on the end of the string.
If no line ends are visible:
Replace the spool (see chapter on ‘Re-
placing/mounting the spool’).
Attention! Thread remnants
can be projected and lead to
injuries.
Working with the 2-tooth
blade
Always wear the shoulder
strap and suitable protective
clothing when working with the
device. Wear eye, hearing and
head protection.
Ensure that the blade is installed
correctly. Replace damaged or
blunt tool parts.
There is a risk of injury.
Only use the cutting blade to work
on open, even areas. Carefully in-
spect the area to be cut and remove
all foreign bodies. Avoid hitting
stones, metal or other obstacles.
The blade can be damaged and
there is a risk of kickback by the
device.
When working, hold the cutting head
above the ground and slowly swivel
the device back and forth like a scythe
in an equal arch.
Do not hold the cutting head at an an-
gle.
Do not use the device to cut wild
growth or brushwood.
Regularly check the blades for damage
and replace as needed.
Recommended speed settings:
low/med: Grass / Lawn
high: Scrub / Thicket
If the device vibrates
Clean the device and remove any grass
residue in the cutting head and protective
cover (see the chapter on ‘Maintenance
and Care’)
Cleaning and
maintenance
Warning! Risk of injury from
moving dangerous parts!
Contact our Service Centre about
repairs and servicing not described
in this manual. Only use OEM
parts. Risk of injury!
Turn off the appliance and, before
doing any servicing, remove the
battery.
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.
48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside PPFSA 40-Li A1 - IAN 376667 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info