Bedienungsanleitung Parkside PSBM 500 A1 - IAN 78322 (Seite 40 von 44) (Deutsch, Englisch, Holländisch, Französisch)

653185

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

40 GB

Before first use / First use / Servicing and cleaningGeneral safety advice for electrical power tools / Before first use

Avoid drilling paints containing lead

or other substances hazardous to

health.

Do not drill or abrade materials con-

taining asbestos. Asbestos is a known

carcinogen.

Do not drill moist materials or damp

surfaces.

When working with electrical tools,

hold them firmly in both hands and

make sure that your footing is secure.

Using both your hands to hold electrical tools

ensures safer operation of them.

If the inserted tool jams, switch off the

electrical power tool immediately. Be

prepared for high reaction torques as they may

cause kickback.

Always keep the device clean, dry

and free of oil or grease.

Only handle the electrical tool by

means

of the insulated handling surfaces

when

you are carrying out jobs where the

insertion tool may come into contact

with hidden power supply lines or its

own power cable. Contact with a live elec-

trical wire also makes metal parts of the electrical

tool live and leads to electric shock.

Keep your workplace clean and tidy.

Mixing materials is particularly dangerous.

Dust from light metals can burn or explode.

Wait until the electrical tool has come

to a standstill before putting it down.

The insertion tool could get caught up in some-

thing and this may lead to control of the electrical

tool being lost.

Caution utility services!

DANGER! Ensure that you do not strike

electrical cables, gas or water pipes when

you are working with the electrical power

tool. Check a wall using a suitable detector before

you drill or cut slots.

Original accessories /

attachments

Use only the accessories and attachments

detailed in the operating instructions.

The use of inserted tools or accessories other than

those recommended in the operating instructions

could lead to you suﬀering an injury.

Before ﬁrst use

DANGER OF INJURY!

Switch the device oﬀ and pull the plug out of the

mains socket before carrying out any work on the

device.

Attaching the auxiliary handle

NOTE: For safety reasons this tool must always be

used with the auxiliary handle

in place.

Turn the wing screw

anti-clockwise and swivel

the additional handle

into the desired position.

Then tighten the wing screw

again.

Using the depth stop

Open the wing screw

Make sure that the toothing on the depth stop

is pointing downwards.

Pull the depth stop

out as far as necessary

so that the distance between the tip of the drill

and the tip of the depth stop corresponds to

the desired drilling depth.

Firmly tighten the wing screw

Inserting tools

Quick-action drill chuck:

Take ﬁrm hold of the back casing

of the

quick-action drill chuck

and turn the front

casing

until the tool can be inserted.

Insert the tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PSBM 500 A1 - IAN 78322 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info