Bedienungsanleitung Parkside PSBM 500 A2 - IAN 93163 (Seite 27 von 31) (Deutsch, Englisch, Holländisch)

576767

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

27 GB

General safety advice for electrical power tools General safety advice for electrical power tools

parts only. This will ensure that your device

remains safe to use.

Safety advice for hammer-

action drills

Use the auxiliary handle supplied with

the device. Loss of control of the tool can

lead to injury.

Always wear ear protection when us-

ing percussion drills. Exposure to noise can

cause hearing loss.

Secure the workpiece. Use clamps or a

vice to grip the workpiece ﬁrmly.

If a dangerous situation arises, pull

the mains plug immediately out of the

mains socket.

Always work with the mains lead

leading away from the rear of the

device.

Do not allow the ventilation slots to

become covered while the device is

operating. Do not insert any objects into the

ventilation slots.

DANGER OF FIRE FROM FLYING SPARKS!

Drilling or abrading metal creates ﬂying sparks.

Always make sure that nobody is placed in any

danger and that there are no inﬂammable ma-

terials near the working area.

HAZARDOUS DUSTS!

Working with harmful / poisonous dusts presents

a danger to health for the tool operator and

any persons in the vicinity.

Wear safety glasses and a dust pro-

tection mask!

Avoid drilling paints containing lead

or other substances hazardous to

health.

Do not drill or abrade materials con-

taining asbestos. Asbestos is a known

carcinogen.

Do not drill moist materials or damp

surfaces.

When working with electrical tools,

hold them firmly in both hands and

make sure that your footing is secure.

Using both your hands to hold electrical tools

ensures safer operation of them.

If the inserted tool jams, switch off the

electrical power tool immediately. Be

prepared for high reaction torques as they may

cause kickback.

Always keep the device clean, dry and

free of oil or grease.

Only handle the electrical tool by

means

of the insulated handling surfaces

when

you are carrying out jobs where the

insertion tool may come into contact

with hidden power supply lines or its

own power cable. Contact with a live elec-

trical wire also makes metal parts of the electrical

tool live and leads to electric shock.

Keep your workplace clean and tidy.

Mixing materials is particularly dangerous. Dust

from light metals can burn or explode.

Wait until the electrical tool has come

to a standstill before putting it down.

The insertion tool could get caught up in some-

thing and this may lead to control of the electrical

tool being lost.

Caution utility services!

DANGER! Ensure that you do not strike

electrical cables, gas or water pipes when

you are working with the electrical power

tool. Check a wall using a suitable detector before

you drill or cut slots.

Original accessories /

attachments

Use only the accessories and attachments

detailed in the operating instructions.

The use of inserted tools or accessories other than

those recommended in the operating instructions

could lead to you suﬀering an injury.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PSBM 500 A2 - IAN 93163 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PSBM 500 A2 - IAN 93163

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info