Bedienungsanleitung Parkside PSBS 24 A1 IAN 64192 (Seite 41 von 55) (Englisch, Portugiesisch, Spanisch)

744061

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

41 GB/MT

Preparing for use

 Push the coupler (see Fig. A) onto the recharge-

able battery pack

. Insert the mains plug

into the socket.



The red charge indicator LED

indicates that the

charging process has started. The red light goes out

as soon as the battery pack

is fully charged.

 The green charge indicator LED

shows that

the charging process is complete and the

battery pack

is ready for use.

NOTE: If the rechargeable battery pack is discharg

and still hot from from the tool being used, it will not

be recharged immediately. The charging process

will start automatically, as soon as the rechargeable

battery pack has cooled to an adequate temperature.



Do no

t use the quick-charge process to charge

a battery pack

for a second time in close

succession. Otherwise there is the danger that

the battery pack

will become overcharged

and its useful life and that of the charger reduced.



Switch the charger

oﬀ for at least 15 min-

utes between successive charging processes.

To do this pull the mains plug out of the socket.



Inserting / removing the battery

pack into / out of the device

Removing the rechargeable battery pack:



In or

der to remove the rechargeable battery,

turn the appliance 180°.

 Press the unlocking button

and push the re-

chargeable battery pack

out of the appliance.

Inserting the rechargeable battery pack:



Push t

he rechargeable battery pack

onto

the appliance.



Checking the battery

charge state

 Press the battery charge state test button

The remaining charge capacity is shown on the

LED display



2-speed gear operation

In ﬁrst gear (gear selector switch

position: 1)

the device achieves a speed of approx. 500 min

-1

and a high torque. For example, for screwing work

with small screw diameters.

In second gear (gear selector switch

position: 2)

the device achieves a speed of approx. 1800 min

-1

and a lower torque. For example, for rapid drill

progress in masonry or large drill or screw diameters.



Torque preselection

Use the torque preselection ring

to set the torque.

When this set torque is reached the clutch decouples

the drive. This allows you to screw in screws to a

predetermined depth, which is ideal e.g. for screw-

ing in a series of screws.



Select a lo

wer setting for small screws or soft

materials.



Select a high se

tting for large screws, hard ma-

terials, or when screwing out screws.



or drilling tasks select drilling setting by placing

the torque preselection ring in the

position.



Drilling / screwing /

impact drilling

Drilling / screwing:

 Turn the setting ring

to the symbol .

Impact drilling:



urn the setting ring

to the symbol .



Changing inserted tools

Your cordless hammer drill has a fully automatic spindl

lock

and is ﬁtted with a single-sleeve drill chuck

with radial lock “Made in Germany” by

Once the motor has come to a halt, the drive shaft

is automatically locked so that the quick-action drill

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PSBS 24 A1 IAN 64192 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PSBS 24 A1 IAN 64192

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info