Bedienungsanleitung Parkside PSBS 240 C2 - IAN 321203 (Seite 24 von 124) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

773450

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

GB IE

• Do not overreach. Keep proper

footing and balance at all times.

This enables better control of the pow-

er tool in unexpected situations.

• Maintain tools with care.

Many accidents are caused by poorly

maintained power tools.

- Keep cutting tools sharp and clean

for better and safer performance.

- Follow instruction for lubricating and

changing accessories.

- Inspect tool cords periodically and if

damaged have them repaired by an

authorized service facility.

- Inspect extension cords periodically

and replace if damaged.

- Keep handles dry, clean and free

from oil and grease.

• Disconnect tools. When not in use,

before servicing and when changing

accessories disconnect tools from the

power supply. Such preventive safety

measures reduce the risk of starting the

power tool accidentaIly.

• Remove adjusting keys and

wrenches. Form the habit of checking

to see that keys and adjusting wrenches

are removed from the tool before turn-

ing it on. A wrench or a key left at-

tached to a rotating part of the power

tool may result in personal injury.

• Avoid unintentional starting.

Ensure switch is in “off” position when

plugging in.

• Use outdoor extension leads.

When the tool is used outdoors, use

only extension cords intended for out-

door use and so marked.

• Stay alert, watch what you are

doing and use common sense

when operating a power tool.

Do not use a power tool while you are

tired or under the inuence of drugs,

alcohol or medication. A moment of in-

attention white operating power tools

may result in serious personal injury.

• Check damaged parts. This will

ensure that the safety of the power tool

is maintained.

- Before further use of tool, it should

be carefully checked to determine

that it will operate properly and per-

form its intended function.

- Check for alignment of moving parts,

binding of moving parts, breakage of

parts, mounting and any other condi-

tions that may affect its operation.

- A guard or other part that is dam-

aged should be properly repaired or

replaced by an authorized service

centre unless otherwise indicated in

this instruction manual.

- Have defective switches replaced by

an authorized service centre.

- Do not use the tool if the switch does

not turn it on and off. There is a risk

of injury.

• Warning.

The use of any accessory or attach-

ment other than one recommended in

this instruction manual may present a

risk of personal injury.

• Have your tool repaired by a

qualied person. This electric tool

complies with the relevant safety rules.

Repairs should only be carried out by

qualied persons using original spare

parts, otherwise this may result in con-

siderable danger to the user.

Further Safety Instructions

• Connect the device only to a power

point with a

RCD (Residual Current De-

vice)

with a measured residual current

of not more than 30 mA.

• Keep power cords and extension cords

away from the grinding disc In the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PSBS 240 C2 - IAN 321203 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info