Bedienungsanleitung Parkside PSR 310 A1 - IAN 271263 (Seite 6 von 51) (Deutsch, Englisch, Holländisch, Dänisch)

679212

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

6 GB/IE

Introduction

Sanding brush PSR 310 A1

Introduction

Congratulations on your purchase. You have select-

ed a high quality product. The instructions for use

are a part of this product. They contain important

information about safety, use and disposal. Before

using the product, please familiarise yourself with all

the operating and safety instructions. Use the product

only as described and for the speciﬁed applications.

When passing this product on to others please be

sure to also include all of its documentation.

Intended use

This power tool is intended for dry grinding and

brushing wood, plastic, spackle (e.g. plaster), as

well as painted surfaces. It is particularly suitable

for sanding uneven surfaces. The device is not in-

tended for commercial use. Any other uses, and /

or modiﬁcations to the tool are considered improper

use and may result in serious hazards. The manufac-

turer is not liable for damage caused by improper use

Features

Grinding spindle

Dust extraction hood

Suction nozzle

Clamping screw for attaching the dust

extraction hood

Spindle lock

Handle (insulated gripping surface)

On / oﬀ switch

Speed selection wheel

Dust extraction adapter

Hexagonal key

Slatted grinding disc

Sanding sleeve

Sanding sleeve mounting shank

Clamping screw

Tool arm

Dust extraction hood fastening groove

Locking groove

Scope of delivery

1 Sanding brush PSR 310 A1

1 Slatted grinding disc 10 mm, P80

1 Slatted grinding disc 60 mm, P80

1 Mounting shank for sanding sleeves 60 mm

1 Sanding sleeve 60 mm, P80

1 Hexagonal Key

1 Dust extraction adapter

1 Set of instructions for use

Technical Data

Abrasive roll

Rated voltage: 230 V∼ 50 Hz

Rated power input: 310 W

Idle speed: n

1600–3000 min

-1

Protection class: II /

Noise emission value:

Measured sound value determined according to

EN 60745. The A-rated noise level of the power

tool is typically:

Sound pressure level: L

= 82.1 dB(A)

Uncertainty K

: 3 dB

Sound power level: L

= 93.1 dB(A)

Uncertainty K

: 3 dB

Wear ear protection!

Total vibration values:

The total vibration (vector sum of three directions)

is calculated in accordance with EN 60745:

Vibration emission value: a

= 4.53 m / s²

K = 1.5 m / s²

Note: The vibration level given in these operating

instructions has been measured in a procedure ac-

cording to EN 60745 and can be used for the

comparison of appliances. The vibration emission

value speciﬁed can also serve as a preliminary

assessment of the exposure.

Diﬀerent uses of the device give rise to diﬀerent vi-

bration levels and in many cases they may exceed

the values given in these instructions. It is easy to

Introduction / General power tool safety warnings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PSR 310 A1 - IAN 271263 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PSR 310 A1 - IAN 271263

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info