Bedienungsanleitung Parkside PTHSA 20-Li B3 - IAN 405768 (Seite 14 von 216) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch)

819958

Zoom out

Zoom in

Vorherige Seite

1/216

Nächste Seite

PTHSA 20-Li B3 GB│IE │ 9 ■

■ Use only the additional equipment and accesso-

ries speciﬁed in the operating instructions. Using

attachments or accessory tools other than those

recommended in the operating instructions can

lead to a risk of injury.

Additional safety instructions

■ Make sure that there are no bystanders or

animals within a radius of 15 metres when

using the tool. The operator is responsible for

third parties within the working area.

■ Keep the appliance, the cutting mechanism and

the blade guard in good condition to prevent

injury.

■ Children must be supervised to make sure that

they do not play with the appliance.

■ Do not use the appliance until you have famil-

iarised yourself with its use.

■ Do not work with a damaged or incomplete

appliance or an appliance that has been modi-

ﬁed without the consent of the manufacturer.

Never use the appliance with defective protec-

tive equipment. Do not use the appliance if it

has a defective on/oﬀ switch. Before use, check

the safety condition of the appliance, especially

the blade and the saw chain. If the appliance

has been dropped, check for signiﬁcant

damage or defects.

■ Never start the appliance before it is correctly

assembled.

■ When starting and operating the appliance,

ensure that it does not come into contact with

the ground, stones, wire or other foreign mate-

rial. Switch oﬀ the appliance before you put it

down.

■ The appliance is designed for two-handed oper-

ation. Never work with one hand. Make sure

that the appliance is switched oﬀ when relo-

cating the appliance and that you cannot acci-

dentally touch the on/oﬀ switch. Carry the

appliance with the blade facing backwards. Fit

the blade guard during transportation.

Before use

Charge battery pack (see ﬁg. B)

CAUTION!

► Always unplug the appliance before you

remove the battery pack from or connect

the battery pack to the charger.

NOTE

► Never charge the battery pack at an ambient

temperature of below 10°C or above 40°C.

If a lithium-ion battery is going to be stored

for an extended period, the charge level

should be checked regularly. The optimum

charge level is between 50% and 80%. The

storage climate should be cool and dry and

the ambient temperature should be between

0°C and 50°C.

♦ Connect the battery packr to the high-speed

battery chargerz (see ﬁg. B).

♦ Insert the power plug into the socket. The green

charge control LEDp lights up brieﬂy, then the

red control LEDo lights up.

♦ The green charge control LEDp indicates that

charging is complete and the battery packr is

ready for use.

CAUTION!

♦ If the red control LEDo ﬂashes, this means

that the battery packr has overheated and

cannot be charged.

♦ If the red and green control LEDs o/p both

ﬂash, this means that the battery packr is

defective.

♦ Push the battery packr into the appliance.

♦ Switch oﬀ the charger for at least 15 minutes

between successive charging sessions. Also

disconnect the power plug from the mains

power socket.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PTHSA 20-Li B3 - IAN 405768 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info