Bedienungsanleitung Parkside PTK 2000 D3 - IAN 298657 (Seite 31 von 108) (Deutsch, Englisch, Holländisch, Portugiesisch, Spanisch)

691162

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

GB IE

1. Blade dissolves after swit-

ching off the engine

To slightly tightened fastening nut Tighten the right hand thread nut

2. Engine will not start a) Failure mains fuse a) Check mains fuse

b) Defective extension cable b) Replace extension cord

c) Connections on motor or switch not in order c) Repair by electrical specialist

d) Motor or switch faulty d) Repair by electrical specialist

3. Motor wrong direction of

rotation

a) Capacitor faulty a) Repair by electrical specialist

b) Wrong connection b) Exchange polarity of outlet by an



4. Motor will not work, the

fuse is activ

a) Cross section of the extension cable does not



a) see „Electrical connection“

b) Overload by a blunt saw blade b) Change saw blade

5. Fire marks on the cutting

surface

a) blunt saw blade a) Sharpen or change saw blade

b) wrong saw blade b) Change saw blade

Problem Possible cause Fault correction

Trouble shooting

Spare parts/Accessories

Spare parts and accessories can be obtained at

www.grizzly-service.eu

If you do not have internet access, please contact the Service Centre via telephone (see “Service-Center” page 32). Please have the

order number mentioned below ready.

(6) Parallel stop, complete ....................... Order-No. 9110353 0

(40) Transverse stop. .............................. Order-No. 91103531

(2) Blade guard, complete ....................... Order-No. 91104563

(17) Table length extender ....................... Order-No. 9110 4557

(5) Table insert ....................................... Order-No. 91104 566

(7) Table width extender (right) ................ Order-No. 91104 561

(7) Table width extender (left) ................... Order-No. 9110 4 562

(35) Laser .............................................. Order-No. 91104558

(3) Riving knife ....................................... Order-No. 9110 4559

(11) Handwheel, complete ....................... Order-No. 91104560

(19) Push stick ........................................ Order-No. 91104950

(14) On/off switch, complete ................... Order-No. 91104952

(24) Stand brackets (both sides) ............... Order-No. 91103542

(23) Rubber feet ..................................... Order-No. 9110 4951

(4) Saw blade 24 Teeth .......................... Order-No. 13800400

(4) Saw blade 48 Teeth ........................... Order-No. 13800401

(15) Collection bag ................................. Order-No. 91104 556

Guarantee

Dear Customer,

This equipment is provided with a 3-year guarantee from the date

of purchase.

In case of defects, you have statutory rights against the seller of

the product. These statutory rights are not restricted by our guar-

antee presented below.

Terms of Guarantee

The term of the guarantee begins on the date of purchase. Please

retain the original receipt. This document is required as proof of

purchase.

If a material or manufacturing defect occurs within three years of

the date of purchase of this product, we will repair or replace –

at our choice – the product for you free of charge. This guarantee

requires the defective equipment and proof of purchase to be pre-

sented within the three-year period with a brief written descrip-

tion of what constitutes the defect and when it occurred.

If the defect is covered by our guarantee, you will receive either

the repaired product or a new product. No new guarantee peri-

od begins on repair or replacement of the product.

Guarantee Period and Statutory Claims for Defects

The guarantee period is not extended by the guarantee service.

This also applies for replaced or repaired parts. Any damages

and defects already present at the time of purchase must be re-

ported immediately after unpacking. Repairs arising after expiry

of the guarantee period are chargeable.

Guarantee Cover

The equipment has been carefully produced in accordance with

strict quality guidelines and conscientiously checked prior to

delivery.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PTK 2000 D3 - IAN 298657 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info