Bedienungsanleitung Parkside PVKO 50 A1 - IAN 356332 (Seite 15 von 88) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

763011

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

GB IE

Introduction

Congratulations on the purchase of your

new device. With it, you have chosen a

high quality product.

During production, this equipment has

been checked for quality and subjected to

a nal inspection. The functionality of your

equipment is therefore guaranteed.

The operating instructions constitute

part of this product. They contain

important information on safety, use and

disposal. Before using the product, fami-

liarise yourself with all of the operating

and safety instructions. Use the product

only as described and for the applications

specied.

Keep this manual safely and in the event

that the product is passed on, hand over

all documents to the third party.

Proper use

The compressor is intended for the oper-

ation of pneumatic tools (e.g. tyre inator,

blow-out gun and spray paint gun). The

device is not suitable for operating tools

that require a high degree of compressed

air.

Any other use can damage the devices

and thus pose a substantial risk to the user.

These devices are not suitable for commer-

cial use. The warranty is void in the case

of commercial use.

The manufacturer is not liable for damage

caused by improper use or incorrect oper-

ation.

General description

The illustration of the most im-

portant functional components

can be found on the front and

the back fold-out pages.

Content

Introduction ...............................15

Proper use .................................15

General description ....................15

Scope of delivery ............................16

Description of functions .................... 16

Overview ....................................... 16

Technical data ............................16

Safety instructions ...................... 17

Symbols and icons ..........................17

General Safety Instructions for Power

Tools ..............................................17

Residual risks .................................. 19

Initial start-up ............................19

Mounting the bow-type handle ..........19

Fitting the wheels ............................19

Switching on/off ............................. 20

Operation ..................................20

Mounting the compressed air hose ....20

Working instructions ..................20

Adjusting the compressed air ............ 20

Cleaning and servicing ...............20

Cleaning the air lter .......................20

Draining the condensation water .......20

Checking the safety valve .................21

Storage ......................................21

Transport ...................................21

Disposal/environmental

protection ..................................21

Replacement parts/Accessories ..21

Guarantee .................................22

Repair Service ............................23

Service-Center ............................23

Importer ....................................23

Translation of the original

EC declaration of conformity ...... 76

Exploded Drawing ............... 83/84

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PVKO 50 A1 - IAN 356332 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info