Bedienungsanleitung Parkside PWSA 18 A1 - IAN 104454 (Seite 14 von 78) (Deutsch, Englisch, Holländisch)

595313

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

GB IE

dicated rotational speed is at least as

high as what has been specied on the

name plate of the device.

• Carry out a visual inspection of the

grinding disc before use. Do not use

any damaged or deformed grinding

discs. Replace any damaged or worn

grinding discs.

• Make sure that the sparks produced by

grinding do not present a danger, e.g.

reach people or ignite ammable sub-

stances.

• Always wear safety goggles, safety

gloves, respiratory protection and ear

protection when grinding, brushing and

cutting.

• Never keep the ngers between the

grinding disc and spark protection or in

close proximity to the protective hoods.

There is a risk of crushing.

• The rotating parts of the device cannot

be covered due to functional reasons.

Therefore, proceed cautiously and hold

the workpiece rmly in order to avoid

slipping which could cause your hands to

come into contact with the grinding disc.

• The workpiece gets hot during grind-

ing. Do not touch the machined area,

allow it to cool down. There is a risk of

burning. Do not use coolants or the like.

• If you are tired or have consumed al-

cohol or tablets, do not work with the

device. Always have a break on time.

• Turn off the appliance and, before do-

ing any servicing, remove the battery.

RESIDUAL RISKS

Even if properly operating and handling this

electric tool, some residual risks will remain.

Due to its construction and build, this electric

tool may present the following hazards:

a) Cuts

b) Ear damage if working without ear pro-

tection.

c) Damage to your health caused by swing-

ing your hands and arms when operat-

ing the appliance for longer periods of

time or if the unit is not held or main-

tained properly.

d) Health injuries which result from swing-

ing hand and arm, in the event that the

device is used over a longer period

of time or is not used and maintained

properly.

Warning! During operation, this elec-

tric tool generates an electromagnetic

eld which, under certain circum-

stances, may impair the functionality

of active or passive medical implants.

To reduce the risk of serious or lethal

injuries, we recommend that persons

with medical implants consult their

doctor and the manufacturer of their

medical implant before operating the

machine.

Kickback

Kickback is the sudden reaction from a chop-

ping or blocked grinder attachment such as a

grinding disc, grinding plate, wire brush etc.

Chopping or blocking leads to sudden stop-

ping of the rotating attachment. This causes

an uncontrolled electric tool to accelerate in a

direction counter to the rotational direction of

the attachment tool. If, for example, a grind-

ing disc cuts into the workpiece or blocks it,

the edge of the grinding disc that digs into

the workpiece can get caught and, through

that, break off the grinding disc or cause a

kickback. The grinding disc then moves to-

wards or away from the operator, depending

on the direction of rotation of the disc at the

blocked spot. Here, the grinding discs can

also break. A kickback is caused by wrongly

or incorrectly operating the electric tool. It can

be avoided by suitable cautionary measures,

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PWSA 18 A1 - IAN 104454 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PWSA 18 A1 - IAN 104454

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info