Bedienungsanleitung Parkside PWSA 18 A1 - IAN 104454 (Seite 60 von 78) (Französisch)

595313

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

eld which, under certain circum-

stances, may impair the functionality of

active or passive medical implants. To

reduce the risk of serious or lethal inju-

ries, we recommend that persons with

medical implants consult their doctor

and the manufacturer of their medical

implant before operating the machine.

Safety instructions for all ap-

plications

Common safety instructions for

grinding, sanding, working with

wire brushes and cutting grinders:

• This electric tool is to be used as

a grinder, sander, wire brush

and cutting grinder. Follow all

safety instructions, directives, il-

lustrations and facts which you

receive with the device. If you do

not follow these instructions, an electri-

cal shock, re and/or serious injury

may occur.

• This electric tool is not suitable

for cup brushes. Using the electric

tool in ways for which it is not intended

may cause hazards and injuries.

• This electric tool is not suitable

for cup wheels, mounted points

or grinding cones. Using the electric

tool in ways for which it is not intended

may cause hazards and injuries.

• This electric tool is not suitable

for polishing. Using the electric tool

in ways for which it is not intended may

cause hazards and injuries.

• Do not use any accessories that

are not specically intended and

recommended for this electric

tool by the manufacturer. Simply

because an accessory can be attached

to your electric tool does not guarantee

safe operation.

• The allowable rotation speed of

the attachment tools must be at

least as high as the highest rota-

tion speed indicated on the elec-

tric tool. Accessories that run faster

than the allowable speed can break

and y apart.

• The outside diameter and thick-

ness of the attachment tool must

correspond to the dimensions

indicated for your electric tool.

Attachment tools which are wrongly

dimensioned cannot be sufciently

shielded or controlled.

• Attachment tools with threaded

attachment must t the thread-

ing of the grinding spindle ex-

actly. For attachment tools which

are mounted through a ange,

the diameter of the hole in the

attachment tool must t the

mounting diameter of the ange.

Attachment tools which cannot be pre-

cisely attached to the electric tool turn

unevenly, vibrate very strongly and can

ultimately lead to a loss of control.

• Never use damaged attachment

tools. Check attachment tools

such as grinding discs for chip-

ping or cracks, grinding plates

for cracks, wear or strong abra-

sion and wire brushes for loose

or broken wires before using

them. If the electric tool or the

attachment tool falls off, check

whether it is damaged or, use

an undamaged attachment tool.

If you have checked the at-

tachment tool and attached it,

keep yourself and any nearby

persons beyond the level of the

rotating attachment tool and al-

low the device to run for 1 min.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PWSA 18 A1 - IAN 104454 Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PWSA 18 A1 - IAN 104454

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info