Bedienungsanleitung Parkside PWSAP 20-L i A1 - IAN 289752 (Seite 24 von 114) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

722852

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

3. Disconnect the plug from the power

source and/or the battery pack from

the power tool before making any

adjustments, changing accessories,

or storing power tools. Such preventive

safety measures reduce the risk of starting the

power tool accidentally.

4. Store idle power tools out of the

reach of children and do not allow

persons unfamiliar with the power

tool or these instructions to operate

the power tool. Power tools are

dangerous in the hands of untrained users.

5. Maintain power tools. Check for

misalignment or binding of moving

parts, breakage of parts and any

other condition that may aﬀect the

power tool’s operation. If damaged,

have the power tool repaired before

use. Many accidents are caused by poorly

maintained power tools.

6. Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are

easier to control.

7. Use the power tool, accessories

and tool bits etc. in accordance

with these instructions, taking into

account the working conditions and

the work to be performed. Use of the

power tool for operations diﬀerent from those

intended could result in a hazardous situation.

Battery tool use and care

1. Recharge only with the charger

speciﬁed by the manufacturer. A

charger that is suitable for one type of battery

pack may create a risk of ﬁre when used with

another battery pack.

2. Use power tools only with

speciﬁcally designated battery

packs. Use of any other battery packs may

create a risk of injury and ﬁre.

3. When battery pack is not in use,

keep it away from other metal

objects, like paper clips, coins, keys,

nails, screws or other small metal

objects, that can make a connection

from one terminal to another. Shorting

the battery terminals together may cause

burns or a ﬁre.

4. Under abusive conditions, liquid

may be ejected from the battery;

avoid contact. If contact accidentally

occurs, ﬂush with water. If liquid

contacts eyes, additionally seek

medical help. Liquid ejected from the

battery may cause irritation or burns.

Service

1. Have your power tool serviced by

a qualiﬁed repair person using only

identical replacement parts. This will

ensure that the safety of the power tool is

maintained.

Q Angle grinder warnings

Safety warnings common for grinding

and wire brushing operations:

1. This power tool is intended to

function as a grinder and wire

brush. Read all safety warnings,

instructions, illustrations and

speciﬁcations provided with this

power tool. Failure to follow all instructions

listed below may result in electric shock, ﬁre

and/or serious injury.

2. Operations such as sanding,

polishing or cutting-oﬀ are not

recommended to be performed with

this power tool. Operations for which the

power tool was not designed may create a

hazard and cause personal injury.

3. Do not use accessories which

are not speciﬁcally designed

and recommended by the tool

manufacturer. Just because the accessory

can be attached to your power tool, it does

not assure safe operation.

4. The rated speed of the accessory

must be at least equal to the

maximum speed marked on the

power tool. Accessories running faster than

their rated speed can break and ﬂy apart.

5. The outside diameter and the

thickness of your accessory must be

within the capacity rating of your

power tool. Incorrectly sized accessories

cannot be adequately guarded or controlled.

6. Threaded mounting of accessories

must match the grinder spindle

thread. For accessories mounted

by ﬂanges, the arbour size hole of

the accessory must ﬁt the locating

diameter of the ﬂange. Accessories that

do not match the mounting hardware of the

power tool will run out of balance, vibrate

excessively and may cause loss of control.

26 GB / IE

289752_CB8_DE_EN_FR_NL_CS_ES_PT_170930.indb 26 9/30/17 8:11 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PWSAP 20-L i A1 - IAN 289752 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PWSAP 20-L i A1 - IAN 289752

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info